News:

PsrStyles.com
- Download Styles and Expansion Packs

Main Menu

Device holder for genos

Started by frankmusik, December 17, 2017, 02:32:35 PM

Previous topic - Next topic

Al Ram

Vali

thanks a lot for your prompt response. 

I believe that you are 100% right.   Althought the tube included in the K&M 232 that you mentioned has a length of 175mm and the tube i was looking at has a lenght of 130mm but the thread should be the same at 3/8.    That means i would need an adapter from 3/8 to 5/8.

This is what i am considering ordering to adapt an iPad Pro 12.9 inches to the Genos.   I currently have the iPad on a microphone stand but want to place the iPad on Genos.  That would eliminate the need to carry an additional microphone stand.

I currently have this iPad holder which as a 5/8 female thread. 
https://www.bhphotovideo.com/c/product/1333976-REG/auray_ipu_108_universal_tablet_holder.html

To place the iPad directly on the Genos, It looks like i would need to buy the following:

1. Genos Device holder
https://m.thomann.de/gb/millenium_genos_device_holder.htm

2. Short tube
https://m.thomann.de/intl/km_7232000155.htm?i11l=en_GB%3AUS.EUR%3AUSD

3. 3/8 to 5/8 adapter
https://www.ebay.com/itm/5-8-Male-to-3-8-Female-Microphone-Mic-Stand-Adapter-Thread-Screw-W5T6-/222638277743

Thanks again.  Have a great day.
AL
San Diego/Tijuana

valimaties

Quote from: Al Ram on February 26, 2018, 09:59:00 PM
Vali

thanks a lot for your prompt response. 

I believe that you are 100% right.   Althought the tube included in the K&M 232 that you mentioned has a length of 175mm and the tube i was looking at has a lenght of 130mm but the thread should be the same at 3/8.    That means i would need an adapter from 3/8 to 5/8.

This is what i am considering ordering to adapt an iPad Pro 12.9 inches to the Genos.   I currently have the iPad on a microphone stand but want to place the iPad on Genos.  That would eliminate the need to carry an additional microphone stand.

I currently have this iPad holder which as a 5/8 female thread. 
https://www.bhphotovideo.com/c/product/1333976-REG/auray_ipu_108_universal_tablet_holder.html

To place the iPad directly on the Genos, It looks like i would need to buy the following:

1. Genos Device holder
https://m.thomann.de/gb/millenium_genos_device_holder.htm

2. Short tube
https://m.thomann.de/intl/km_7232000155.htm?i11l=en_GB%3AUS.EUR%3AUSD

3. 3/8 to 5/8 adapter
https://www.ebay.com/itm/5-8-Male-to-3-8-Female-Microphone-Mic-Stand-Adapter-Thread-Screw-W5T6-/222638277743

Thanks again.  Have a great day.

Hi
I have this mic holder from Shure...


I think it is the same thread screw that you want! you don't have one? Or you already use it?
What I want to say is now all mic holders come with this little thread screw!  ::)

Regards,
Vali
______________________________________________
Genos(1) v2.13, Korg PA5X, Allen & Heath SQ5
My youtube channel - https://www.youtube.com/channel/UCzi9PPrMTjN8_zX9P9kelxg

Vali Maties - Genos

Al Ram

Vali

Great idea !!!   I have a couple of Shure mics and the mic holders that came with it.    Tonight (it is 2pm here) I will check to see if they came with the adapters.

thanks again.

AL
San Diego/Tijuana

valimaties

Quote from: Al Ram on February 27, 2018, 01:02:12 AM
Vali

Great idea !!!   I have a couple of Shure mics and the mic holders that came with it.    Tonight (it is 2pm here) I will check to see if they came with the adapters.

thanks again.

Great! :)
(Here is 00:25) :D No far away :)))

Regards,
Vali
______________________________________________
Genos(1) v2.13, Korg PA5X, Allen & Heath SQ5
My youtube channel - https://www.youtube.com/channel/UCzi9PPrMTjN8_zX9P9kelxg

Vali Maties - Genos

Al Ram

Quote from: frankmusik on December 17, 2017, 02:32:35 PM
Dear  genos Players waiting for the device holder....

Here they are...  made in Germany in solid Aluminium Quality...



http://www.ebay.de/itm/YAMAHA-Device-Holder-Halter-Universell-fur-YAMAHA-GENOS-Keyboard/192398712408?hash=item2ccbdb5e58:g:qiMAAOSwI8laM-Pb

I think eBay will Translate next days and put them in all eBay platforms..

Greetings from Germany
Frank


Ps: for psr Tutorial Member Order via pm Cheaper :-)

Frank

So, is this already available to purchase in USA . . . ?  the last updates indicated 2 weeks. 

Also, has it been tested with iPad Pro 12.9 inches both in portrait and landscape modes . . . . ?

I believe there is also an additional 'joint' piece'

Really want to buy it . . . .

thanks
AL
San Diego/Tijuana

JohnS (Ugawoga)

Where does the battery go??? ;D
Genos 2     AMD RYZEN  9 7900  12 Core Processor 32 ram,   Focusrite Scarlet 4i4 4th Gen.

Bachus

Quote from: AlBags on February 21, 2018, 03:43:04 PM
Hi ..

Yes, you have to be careful when the mounting is in use. It may be possible with iPad to use a 'buffer' as extra support. It's good that the mounting position is on a radius, which makes it quite strong area.

The holder is today in stock at Thomann .de
https://m.thomann.de/gb/millenium_genos_device_holder.htm?ref=msg_a_2
Previously, a 'set' has been available for Tyros5 at a cost-saving. This is not available option (yet!)
I'll report back when I have mine.

Al.
🎹😊

Its no longer available at Thomann, altough there are alternatives

valimaties

I don't recommend this holder. It scratched my Genos (not so visible, but it did it :( ) even if it has a thin sponge glued on it.

I use now on my K&M Spider Pro keyboard stand (for at least 10 years), this K&M Universal Holder and this adjustable tablet holder, also from K&M

Universal Holder it has a very powerfull strength on Spider stand, and the tablet does not make "motions" ...




Regards,
Vali
______________________________________________
Genos(1) v2.13, Korg PA5X, Allen & Heath SQ5
My youtube channel - https://www.youtube.com/channel/UCzi9PPrMTjN8_zX9P9kelxg

Vali Maties - Genos

AlBags


Greets Val!

I also have used a K&M Spider Pro in silver ... Best and strongest stand out there by FAR ... alsoroom underneath for 3-4 pedals!
I use the K&M accessories wherever possible, which fit on the stand.
Brilliant accessories ... really strong.

Al.
😊  I started out with nothing .. and I've got most of it left!  😊

🎹 Tyros 5-76,  now the brilliant Genos 🎹
Genelec 8030C Studio Monitors on K&M stands
K&M Spider Pro Stand, K&M Accessories. I love K&M!

Bachus

Quote from: valimaties on April 30, 2019, 07:50:01 AM
I don't recommend this holder. It scratched my Genos (not so visible, but it did it :( ) even if it has a thin sponge glued on it.

I use now on my K&M Spider Pro keyboard stand (for at least 10 years), this K&M Universal Holder and this adjustable tablet holder, also from K&M

Universal Holder it has a very powerfull strength on Spider stand, and the tablet does not make "motions" ...

Regards,
Vali

I own the universal k&m tablet holder..
And a K&m double table stand.
But with `genos' in the upper position,
And modx 8 in the lower
It doesn't fit

The genos is to deep, and the tablet holder cant connect
with that depth to the tablestand

I was hoping this would allow me to connect my universal table stand
Directly to the genos...

Al Ram

Quote from: valimaties on April 30, 2019, 07:50:01 AM
I don't recommend this holder. It scratched my Genos (not so visible, but it did it :( ) even if it has a thin sponge glued on it.

I use now on my K&M Spider Pro keyboard stand (for at least 10 years), this K&M Universal Holder and this adjustable tablet holder, also from K&M

Universal Holder it has a very powerfull strength on Spider stand, and the tablet does not make "motions" ...




Regards,
Vali

Vali
when you have a chance, can you please send another picture to include the Genos keyboard and the iPad  . . . just to see how everything fits together . . . the Genos, the stand and the iPad, also do you use a microphone for singing ? if so, how do you mount it . . .

thanks in advance.
AL
San Diego/Tijuana

AlBags


I mount my extendable boom mic holder (K&M) on the Genos device holder Thomann sells (or Frank)

Fits/works well, and pretty solid.

I use Genos on the Spider Pro lower arms, top are free, and folded. I use the music stand.
😊  I started out with nothing .. and I've got most of it left!  😊

🎹 Tyros 5-76,  now the brilliant Genos 🎹
Genelec 8030C Studio Monitors on K&M stands
K&M Spider Pro Stand, K&M Accessories. I love K&M!

valimaties

Quote from: Al Ram on April 30, 2019, 11:51:39 AM
Vali
when you have a chance, can you please send another picture to include the Genos keyboard and the iPad  . . . just to see how everything fits together . . . the Genos, the stand and the iPad, also do you use a microphone for singing ? if so, how do you mount it . . .

thanks in advance.

Hi Al.
This one (and this one, not so clear) are the only pictures I have with all mounted. I used my Android tablet only to connect to my Behringer X32 Compact mixer. Right now, I don't use anymore my X32, because I want to sell it to buy something else :) We have a sound team now, the sound system is much bigger, for big events (300-500 people).

Spider has also the connector for microphone stand.



Regards,
Vali
______________________________________________
Genos(1) v2.13, Korg PA5X, Allen & Heath SQ5
My youtube channel - https://www.youtube.com/channel/UCzi9PPrMTjN8_zX9P9kelxg

Vali Maties - Genos

JohnS (Ugawoga)

Genos 2     AMD RYZEN  9 7900  12 Core Processor 32 ram,   Focusrite Scarlet 4i4 4th Gen.

ckobu

Quote from: Al Ram on April 30, 2019, 11:51:39 AM
Vali
when you have a chance, can you please send another picture to include the Genos keyboard and the iPad  . . . just to see how everything fits together . . . the Genos, the stand and the iPad, also do you use a microphone for singing ? if so, how do you mount it . . .

thanks in advance.

This might be useful to you. The left is a tablet for my mixer (Behringer XR12) but you can put the Ipad. This stand is home made. The right is the text screen on a flat microphone stand.

[attachment deleted by admin]
Watch my video channel

Al Ram

Vali and Ckobu

Great pictures.  Your setup looks great, very neat, very orderly.

I wonder if the tablet holder can hold an iPad Pro 12.9 inches in portrait mode . . . due to the distances between the stand, the holder and the keyboard . . . 

thanks again.   
AL
San Diego/Tijuana

louwe46

Hey.
Does anyone use the K&M Baby Spider 18840 together with the Tablet holder K & m 19791 for the iPad Pro 12.9 inch?
is there room enough for that ipad?

Can the carrying arms tilt slightly downwards to have a better overview of the Genos?  see picture

I would have liked to hear this.
Thank you.
this is a Google translation.

[attachment deleted by admin]