Device holder for genos

[frankmusik]

Dear  genos Players waiting for the device holder....

Here they are...  made in Germany in solid Aluminium Quality...



http://www.ebay.de/itm/YAMAHA-Device-Holder-Halter-Universell-fur-YAMAHA-GENOS-Keyboard/192398712408?hash=item2ccbdb5e58:g:qiMAAOSwI8laM-Pb

I think eBay will Translate next days and put them in all eBay platforms..

Greetings from Germany
Frank


Ps: for psr Tutorial Member Order via pm Cheaper :-)

[Lee Batchelor]

That's exciting, Frank! Thanks for sharing. I'll think about that in about 2 years when Canada finally gets a decent shipment of Genos keyboards....LOL 

[Al Ram]

Frank,
can this device hold an iPad Pro 12.9 inches.   if so, that is great. I want two of these.

Also, i want the Genos screen protector.

I looked at these two items on your ebay link.  Unfortunately, i do not understand German.   If there is an option to change the language, i cannot find it for same reason.

Is there an English link and can we buy in USA . . . . ?   

thanks in advance.

[gerarde]

Here is is in USA eBay.

https://www.ebay.com/itm/YAMAHA-Device-Holder-Holder-Universal-for-yamaha-GENOS-Keyboard/202149225592?hash=item2f11086478:g:qiMAAOSwI8laM-Pb

Gerard

[EileenL]

I use my I pad pro on the music stand as I also occasionally still use sheet music. Genos dose not have those extra holes like Tyros 5 did so to use the device you can also use the music stand.

[zionip]

There are only 4 such device slots at the back of Genos and Tyros, the middle 2 slots for the music stand, the outer pair of slots are for the Genos / Tyros speakers.

The device holders mentioned in this thread require additional hardware to hold objects like iPad Pro / tablet, external monitor etc - more flexible but definitely a lot costlier than the no-cost Genos music stand.

Thanks,
Paul

[JohnS (Ugawoga)]

Hi

I reckon Eileen would make a top entepaneur on Dragons Den

"Who needs and expensive bit of plastic $46 or £35 approx when you have a music stand that the Ipad would comfortably sit on"!!

Nahh!!!!!! "I'm OUT"!!!!

[MisterGenos]

Hallo Frank ,

I order this one for my"n screen thanks


Mister Genos

[JohnS (Ugawoga)]

Hi

I just went down to Wickes and got a flat length of wood with a woodgrain finish and screwed four legs on It and it is used to stand My 21 Inch Music reader  HP21 slate on.
Only cost £10 and a little savvy!! "Hey presto"!!

[Al Ram]

This device is a great idea. Maybe a bit on the expensive side. 

Certainly, more expensive than the no-cost Genos music stand.  However, when you need to carry stuff, this smaller device is much easier than the music stand or the mic stand.   I would prefer to carry this small device to connect my iPad.

If you do not need to carry around, then probably not needed.

thanks

[frankmusik]

Sorry for my delay...
the holder is for small Things like iPad ... some use it also for Mikrophone arm....

A lot of Musician in Europe dont use scoreholder Or speakers... so they have 4 Poss. To use.
Greetings frank

Ps: for cheaper Buying just Send a PM

[frankmusik]

Hi al, we tested with iPad Pro also.
Depend on iPad holder it works fine.
Next days I do on eBay with k&m iPad holder and a 3D holder.

First I tried with a bolt (14cm) but was tooooo heavy

Greetings frank

[Al Ram]

Frank
thanks a lot for the update.

I am very interested and if it works with iPad Pro 12.9inches  in both modes Portrait and Landscape (vertical and horizontal) i will definitely want it.   Please let me know when it will be available in eBay with the K&M holder to order.

Have a great day.  Greetings

[Oldden]

Hi,
I have a Yamaha L7 stand for my keyboard. On the back supporting brace there is a tapped hole which could be used to hold a bracket for a tablet. Or just use a G-clamp affair on the brace tube. Local diy shop might have something.
Oldden

[AlBags]

Frank ...  Hi

Any update on the Device Holder stock? ...  Still 2 weeks?

Thx .. Al.

[Kaarlo von Freymann]

... some use it also for Mikrophone arm....

Hi Frank,

1
nice to see you also on this site, not only in Germany.  I do have this item, but I do not dare use it as a microphone boom holder for my very light Behriger condensor.
Do you really think the bushings inside Genos will be sturdy enough not to brake when some "angeheiterter" man grabs the boom in order not to fall. I now have he boom fixed to the keyboard stand, so if anything brakes it is no big issue.

2
There was this discussion on the German site as to whether reg files can be transferred or not. You wrote, in case the set up was ok,  yes. We now know that those who divided their Tyros hard disk into 4 partitions like recommended on the German site years ago (Robert Mueller)  are those who have a problem which seems to be very difficult to solve. Have you encountered and solved that problem in Germany ?

regards
Kaarlo von Freymann Helsinki Finland

[AlBags]

Kaarlo ..


Hi. I am about to test one on my Genos. I will use the mounting with a short 125mm extension tube by K&M.
I will use just to hold small device, as I use Shure SM58, which is really too heavy, and leverage is too great
I'm sure the mount will be ok for small device, but NOT heavy, like mics. It would be ok, but if you catch/knock it, damage could be done.
As an Engineer, I looked at the construction of case in the outer mounting area each side. It is very strong here, as it is on a thick section radius corner and load is spread through bracket/2 pins. There may also be metal/rubber bushing inside, but I have not looked.
I will report back when I tried mine!
I am waiting to order from Thomann, as MusikCity is too slow to UK.

Best Wishes ...

Al. 👍😊

[Al Ram]

Has anybody tested this device holder with an iPad Pro 12.9 inches in both portrait (vertical) and landscape (horizontal) modes . . . . ?

Currently, i have my iPad Pro 12.9 inches on a mic stand and if this device can hold the larger iPad pro, it would be great to get rid of the mic holder when gigging . . .  one less thing to transport . . .

thanks in advance.

[AlBags]

  0.7Kg (1.6lbs) .. Will easily hold the weight, but the 'leverage' is the issue.
The pins and holes wont break, that just leaves the case area or the iPad mounting.

Maybe Frank tried!

Al.

[AlBags]

This one Al?  ... but Genos version of it? ...

https://m.thomann.de/gb/millenium_tyros_device_holder_i_pad_set.htm#

Al.

[Al Ram]

This one Al?  ... but Genos version of it? ...

https://m.thomann.de/gb/millenium_tyros_device_holder_i_pad_set.htm#

Al.

This one would be perfect.   I sent an email to vendor asking if they have it for Genos.  Hope they respond soon. 

thanks

[AlBags]

They are due with Thomann any time now.
I buy my Konig & Meyer (K&M) kit from them now, as Service is good, and fast postage.

Cheers!  Al.

[Al Ram]

today I got this response from Thomann

"Thank you for your request. The device holder will be available in our onlineshop in a few days. It also will offer the possibility to attach the ipad to your genos. Depending on what kind of iPad you use, you will need a Base Tube"

thanks

[AlBags]

This is the short 'tube' I have. Actually a bar.
It's really the tube for a table mic stand.  130mm x 18mm.

Al.



[attachment deleted by admin]

[Kaarlo von Freymann]

Kaarlo ..


will use the mounting with a short 125mm extension tube by K&M.
I use Shure SM58, which is really too heavy, and leverage is too great
I'm sure the mount will be ok for small device, but NOT heavy, like mics. It would be ok, but if you catch/knock it, damage could be done.
As an Engineer, I looked at the construction of case in the outer mounting area each side. It is very strong here, as it is on a thick section radius corner and load is spread through bracket/2 pins. There may also be metal/rubber bushing inside, but I have not looked.
I will report back when I tried mine!
I am waiting to order from Thomann, as MusikCity is too slow to UK.

Best Wishes ...

Al. 👍😊

I very much agree with you. Mic booms that someone can "run into"  are going to brake the attachment inside the Genos.   I did trial mount a boom and you could feel the attaching point was not sturdy enough. For mounting the Roland V 7 it seems ok.

cheers

Kaarlo

[AlBags]

Hi ..

Yes, you have to be careful when the mounting is in use. It may be possible with iPad to use a 'buffer' as extra support. It's good that the mounting position is on a radius, which makes it quite strong area.

The holder is today in stock at Thomann .de
https://m.thomann.de/gb/millenium_genos_device_holder.htm?ref=msg_a_2
Previously, a 'set' has been available for Tyros5 at a cost-saving. This is not available option (yet!)
I'll report back when I have mine.

Al.
🎹😊

[Al Ram]

The holder is today in stock at Thomann .de
https://m.thomann.de/gb/millenium_genos_device_holder.htm?ref=msg_a_2
Previously, a 'set' has been available for Tyros5 at a cost-saving. This is not available option (yet!)
I'll report back when I have mine.

Al.
🎹😊

Thanks so much for the notice.   I am planning on ordering this one.   Except that i still need to figure out what else i need in addition to this little device.

My understanding is that this device will go into the Genos holes.   My concern is that i have the largest iPad Pro 12.9.   It seems to me that to have this large ipad in portrait (vertical) and landscape (horizontal) mode, there should be sufficient space and probably need the additional tube.

I already have this iPad holder
https://www.bhphotovideo.com/c/product/1266135-REG/auray_ipu_105_universal_large_tablet.html

So, not sure if i can use this one or need to buy a special one . . .

Need to figure out the set that will work out . . . . they should offer one set already including everything . . . .

Maybe i will write them again.

have a great day.

[AlBags]

Hi Al!

I'll talk to you later about this!

Al.

[Al Ram]

This is the short 'tube' I have. Actually a bar.
It's really the tube for a table mic stand.  130mm x 18mm.

Al.

I am trying to determine the thread measurements on this short tube . . . . the thread that will connect to the actual iPad holder.

https://m.thomann.de/gb/km_7232000155.htm

Is it a male 3/8 or 5/8  ?   

I currently have an iPad holder that is a female 5/8.    If the tube is 3/8 i will probably need an additional adapter from 3/8 to 5/8.   

thanks in advance.

[valimaties]

I am trying to determine the thread measurements on this short tube . . . . the thread that will connect to the actual iPad holder.

https://m.thomann.de/gb/km_7232000155.htm

Is it a male 3/8 or 5/8  ?   

I currently have an iPad holder that is a female 5/8.    If the tube is 3/8 i will probably need an additional adapter from 3/8 to 5/8.   

thanks in advance.

It is compatible with K&M 232... and on this page they say this is 3/8
https://m.thomann.de/gb/km_232bk.htm?o=0&search=1519669727

Regards, Vali