News:

PSR Tutorial Forum is Now Back to Life!

Main Menu

Device holder for genos

Started by frankmusik, December 17, 2017, 02:32:35 PM

Previous topic - Next topic

Al Ram

Vali

thanks a lot for your prompt response. 

I believe that you are 100% right.   Althought the tube included in the K&M 232 that you mentioned has a length of 175mm and the tube i was looking at has a lenght of 130mm but the thread should be the same at 3/8.    That means i would need an adapter from 3/8 to 5/8.

This is what i am considering ordering to adapt an iPad Pro 12.9 inches to the Genos.   I currently have the iPad on a microphone stand but want to place the iPad on Genos.  That would eliminate the need to carry an additional microphone stand.

I currently have this iPad holder which as a 5/8 female thread. 
https://www.bhphotovideo.com/c/product/1333976-REG/auray_ipu_108_universal_tablet_holder.html

To place the iPad directly on the Genos, It looks like i would need to buy the following:

1. Genos Device holder
https://m.thomann.de/gb/millenium_genos_device_holder.htm

2. Short tube
https://m.thomann.de/intl/km_7232000155.htm?i11l=en_GB%3AUS.EUR%3AUSD

3. 3/8 to 5/8 adapter
https://www.ebay.com/itm/5-8-Male-to-3-8-Female-Microphone-Mic-Stand-Adapter-Thread-Screw-W5T6-/222638277743

Thanks again.  Have a great day.
AL
San Diego/Tijuana

valimaties

Quote from: Al Ram on February 26, 2018, 09:59:00 PM
Vali

thanks a lot for your prompt response. 

I believe that you are 100% right.   Althought the tube included in the K&M 232 that you mentioned has a length of 175mm and the tube i was looking at has a lenght of 130mm but the thread should be the same at 3/8.    That means i would need an adapter from 3/8 to 5/8.

This is what i am considering ordering to adapt an iPad Pro 12.9 inches to the Genos.   I currently have the iPad on a microphone stand but want to place the iPad on Genos.  That would eliminate the need to carry an additional microphone stand.

I currently have this iPad holder which as a 5/8 female thread. 
https://www.bhphotovideo.com/c/product/1333976-REG/auray_ipu_108_universal_tablet_holder.html

To place the iPad directly on the Genos, It looks like i would need to buy the following:

1. Genos Device holder
https://m.thomann.de/gb/millenium_genos_device_holder.htm

2. Short tube
https://m.thomann.de/intl/km_7232000155.htm?i11l=en_GB%3AUS.EUR%3AUSD

3. 3/8 to 5/8 adapter
https://www.ebay.com/itm/5-8-Male-to-3-8-Female-Microphone-Mic-Stand-Adapter-Thread-Screw-W5T6-/222638277743

Thanks again.  Have a great day.

Hi
I have this mic holder from Shure...


I think it is the same thread screw that you want! you don't have one? Or you already use it?
What I want to say is now all mic holders come with this little thread screw!  ::)

Regards,
Vali
______________________________________________
Genos(1) v2.13, Korg PA5X, Allen & Heath SQ5
My youtube channel - https://www.youtube.com/channel/UCzi9PPrMTjN8_zX9P9kelxg

Vali Maties - Genos

Al Ram

Vali

Great idea !!!   I have a couple of Shure mics and the mic holders that came with it.    Tonight (it is 2pm here) I will check to see if they came with the adapters.

thanks again.

AL
San Diego/Tijuana

valimaties

Quote from: Al Ram on February 27, 2018, 01:02:12 AM
Vali

Great idea !!!   I have a couple of Shure mics and the mic holders that came with it.    Tonight (it is 2pm here) I will check to see if they came with the adapters.

thanks again.

Great! :)
(Here is 00:25) :D No far away :)))

Regards,
Vali
______________________________________________
Genos(1) v2.13, Korg PA5X, Allen & Heath SQ5
My youtube channel - https://www.youtube.com/channel/UCzi9PPrMTjN8_zX9P9kelxg

Vali Maties - Genos

Al Ram

Quote from: frankmusik on December 17, 2017, 02:32:35 PM
Dear  genos Players waiting for the device holder....

Here they are...  made in Germany in solid Aluminium Quality...



http://www.ebay.de/itm/YAMAHA-Device-Holder-Halter-Universell-fur-YAMAHA-GENOS-Keyboard/192398712408?hash=item2ccbdb5e58:g:qiMAAOSwI8laM-Pb

I think eBay will Translate next days and put them in all eBay platforms..

Greetings from Germany
Frank


Ps: for psr Tutorial Member Order via pm Cheaper :-)

Frank

So, is this already available to purchase in USA . . . ?  the last updates indicated 2 weeks. 

Also, has it been tested with iPad Pro 12.9 inches both in portrait and landscape modes . . . . ?

I believe there is also an additional 'joint' piece'

Really want to buy it . . . .

thanks
AL
San Diego/Tijuana

JohnS (Ugawoga)

Where does the battery go??? ;D
Genos, I7 computer 32 gig ram, Focusrite 6i6, Cubase controller, Focal Alpha Monitors, Yamaha DXR8 Speakers
Cubase 10, Sonarworks, Izotope.  Sampletank, Arturia and Korg software.  Now IK Mixbox

Bachus

Quote from: AlBags on February 21, 2018, 03:43:04 PM
Hi ..

Yes, you have to be careful when the mounting is in use. It may be possible with iPad to use a 'buffer' as extra support. It's good that the mounting position is on a radius, which makes it quite strong area.

The holder is today in stock at Thomann .de
https://m.thomann.de/gb/millenium_genos_device_holder.htm?ref=msg_a_2
Previously, a 'set' has been available for Tyros5 at a cost-saving. This is not available option (yet!)
I'll report back when I have mine.

Al.
🎹😊

Its no longer available at Thomann, altough there are alternatives

valimaties

I don't recommend this holder. It scratched my Genos (not so visible, but it did it :( ) even if it has a thin sponge glued on it.

I use now on my K&M Spider Pro keyboard stand (for at least 10 years), this K&M Universal Holder and this adjustable tablet holder, also from K&M

Universal Holder it has a very powerfull strength on Spider stand, and the tablet does not make "motions" ...




Regards,
Vali
______________________________________________
Genos(1) v2.13, Korg PA5X, Allen & Heath SQ5
My youtube channel - https://www.youtube.com/channel/UCzi9PPrMTjN8_zX9P9kelxg

Vali Maties - Genos

AlBags


Greets Val!

I also have used a K&M Spider Pro in silver ... Best and strongest stand out there by FAR ... alsoroom underneath for 3-4 pedals!
I use the K&M accessories wherever possible, which fit on the stand.
Brilliant accessories ... really strong.

Al.
😊  I started out with nothing .. and I've got most of it left!  😊

🎹 Tyros 5-76,  now the brilliant Genos 🎹
Genelec 8030C Studio Monitors on K&M stands
K&M Spider Pro Stand, K&M Accessories. I love K&M!

Bachus

Quote from: valimaties on April 30, 2019, 07:50:01 AM
I don't recommend this holder. It scratched my Genos (not so visible, but it did it :( ) even if it has a thin sponge glued on it.

I use now on my K&M Spider Pro keyboard stand (for at least 10 years), this K&M Universal Holder and this adjustable tablet holder, also from K&M

Universal Holder it has a very powerfull strength on Spider stand, and the tablet does not make "motions" ...

Regards,
Vali

I own the universal k&m tablet holder..
And a K&m double table stand.
But with `genos' in the upper position,
And modx 8 in the lower
It doesn't fit

The genos is to deep, and the tablet holder cant connect
with that depth to the tablestand

I was hoping this would allow me to connect my universal table stand
Directly to the genos...

Al Ram

Quote from: valimaties on April 30, 2019, 07:50:01 AM
I don't recommend this holder. It scratched my Genos (not so visible, but it did it :( ) even if it has a thin sponge glued on it.

I use now on my K&M Spider Pro keyboard stand (for at least 10 years), this K&M Universal Holder and this adjustable tablet holder, also from K&M

Universal Holder it has a very powerfull strength on Spider stand, and the tablet does not make "motions" ...




Regards,
Vali

Vali
when you have a chance, can you please send another picture to include the Genos keyboard and the iPad  . . . just to see how everything fits together . . . the Genos, the stand and the iPad, also do you use a microphone for singing ? if so, how do you mount it . . .

thanks in advance.
AL
San Diego/Tijuana

AlBags


I mount my extendable boom mic holder (K&M) on the Genos device holder Thomann sells (or Frank)

Fits/works well, and pretty solid.

I use Genos on the Spider Pro lower arms, top are free, and folded. I use the music stand.
😊  I started out with nothing .. and I've got most of it left!  😊

🎹 Tyros 5-76,  now the brilliant Genos 🎹
Genelec 8030C Studio Monitors on K&M stands
K&M Spider Pro Stand, K&M Accessories. I love K&M!

valimaties

Quote from: Al Ram on April 30, 2019, 11:51:39 AM
Vali
when you have a chance, can you please send another picture to include the Genos keyboard and the iPad  . . . just to see how everything fits together . . . the Genos, the stand and the iPad, also do you use a microphone for singing ? if so, how do you mount it . . .

thanks in advance.

Hi Al.
This one (and this one, not so clear) are the only pictures I have with all mounted. I used my Android tablet only to connect to my Behringer X32 Compact mixer. Right now, I don't use anymore my X32, because I want to sell it to buy something else :) We have a sound team now, the sound system is much bigger, for big events (300-500 people).

Spider has also the connector for microphone stand.



Regards,
Vali
______________________________________________
Genos(1) v2.13, Korg PA5X, Allen & Heath SQ5
My youtube channel - https://www.youtube.com/channel/UCzi9PPrMTjN8_zX9P9kelxg

Vali Maties - Genos

JohnS (Ugawoga)

Genos, I7 computer 32 gig ram, Focusrite 6i6, Cubase controller, Focal Alpha Monitors, Yamaha DXR8 Speakers
Cubase 10, Sonarworks, Izotope.  Sampletank, Arturia and Korg software.  Now IK Mixbox

ckobu

Quote from: Al Ram on April 30, 2019, 11:51:39 AM
Vali
when you have a chance, can you please send another picture to include the Genos keyboard and the iPad  . . . just to see how everything fits together . . . the Genos, the stand and the iPad, also do you use a microphone for singing ? if so, how do you mount it . . .

thanks in advance.

This might be useful to you. The left is a tablet for my mixer (Behringer XR12) but you can put the Ipad. This stand is home made. The right is the text screen on a flat microphone stand.

[attachment deleted by admin]
Watch my video channel

Al Ram

Vali and Ckobu

Great pictures.  Your setup looks great, very neat, very orderly.

I wonder if the tablet holder can hold an iPad Pro 12.9 inches in portrait mode . . . due to the distances between the stand, the holder and the keyboard . . . 

thanks again.   
AL
San Diego/Tijuana

louwe46

Hey.
Does anyone use the K&M Baby Spider 18840 together with the Tablet holder K & m 19791 for the iPad Pro 12.9 inch?
is there room enough for that ipad?

Can the carrying arms tilt slightly downwards to have a better overview of the Genos?  see picture

I would have liked to hear this.
Thank you.
this is a Google translation.

[attachment deleted by admin]