News:

PSR Tutorial Home
- Lessons, Songs, Styles & More

Main Menu

s970 can not booting

Started by hoxuthi, January 29, 2021, 10:35:27 PM

Previous topic - Next topic

hoxuthi

My PSR-s970 when power up screen just  turn on logo and off then turn on logo then off,  forever, nothing else I can do . someone have any idea how can I fix it ? Thank you so much.

Normanfernandez

Norman Fernandez Keyboardplayer
https://www.youtube.com/channel/UCngm8h5k5NmKnowJpkxlDBQ

PSR S770 - Roland FP 30 - PSR 280
Cubase - Kontakt6

tyros5psr

voici la procedure  here is the procedure

https://usa.yamaha.com/support/faq/keyboards/1820.html

and after that it's usually gone for a spin  brand new

good luck


Aquilauno

Hi Hoxuthi
you could try to reinstall the latest firmware...

Last Year I had a problem with the sx900 that getting stuck on the logo, I could only turn it off.
I installed its latest firmware and it resumed operation. Try it as a last resort ... and good luck.

overover

Hi hoxuthi,

• I suggest to try first a normal System Reset (already mentioned by tyros5psr): Press and hold the right-most white key (C6) while powering on the S970.


•  If this doesn't help try re-installing the latest firmware first (already mentioned by Aquilauno):
>>> https://uk.yamaha.com/en/support/updates/firm_psr-s970.html

Please refer to the "Firmware Installation Guide" that you can download here:
>>> https://uk.yamaha.com/files/download/other_assets/8/789598/PSR-S970S770A3000_Firmware_Installation_EN.pdf

If you are successful with this method, this has the advantage that your system settings and the content of the user drive are retained.


• If this doesn't help either, i.e. the error still occurs, I recommend trying to perform a Factory Reset using the internal Test Program:

- Download the S770/S970 Service Manual and open the PDF on your computer:
>>> https://psrtutorial.com/lessons/workshops/ServiceManuals.html

- Read pages 38 & 39 of the Service Manual and try to start up the Test Mode. (There are two different methods to do this. So if the method 1 fails, try method 2.)

- If the Test Mode can be started successfully, execute Test item "081 : Factory Set", then execute Test item "083 : Test Exit".

- Then restart the S970 and wait unil the "Force Format" procedure is completely finished. If you're lucky, the S970 will start normally again.


Hope this helps!

Best regards,
Chris
● Everyone kept saying "That won't work!" - Then someone came along who didn't know that, and - just did it.
● Never put the Manual too far away: There's more in it than you think! ;-)

hoxuthi

Thank you everyone, I will try everything and see if it works for me.