How to save style after adjusting volume?

Started by Toril S, December 01, 2020, 03:15:55 PM

Previous topic - Next topic

Toril S

Hello friends!
I have a style where one of the right voices is too low. I opened Mixer and adjusted the volume, but no option to save here.
What steps do I need to do? Do I have to be in style creator or something?
Toril S

Genos, Tyros 5, PSR S975, PSR 2100
and PSR-47.
Former keyboards: PSR-S970.

https://www.youtube.com/channel/UCLVwWdb36Yd3LMBjAnm6pTQ?view_as=subscriber



Toril's PSR Performer Page

ckobu

Hi Toril,
after adjusting the volume in the mixer just open Style Creator and save Style with the Save button. That's all you need to do.
Watch my video channel

Toril S

Toril S

Genos, Tyros 5, PSR S975, PSR 2100
and PSR-47.
Former keyboards: PSR-S970.

https://www.youtube.com/channel/UCLVwWdb36Yd3LMBjAnm6pTQ?view_as=subscriber



Toril's PSR Performer Page

Toril S

Help! All other parts of the style vanished! No intros, only main A. How do I change just ONE thing in a style and keep it intact?
I believe I have done this before, but can't remember how!
Toril S

Genos, Tyros 5, PSR S975, PSR 2100
and PSR-47.
Former keyboards: PSR-S970.

https://www.youtube.com/channel/UCLVwWdb36Yd3LMBjAnm6pTQ?view_as=subscriber



Toril's PSR Performer Page

jwyvern

Toril, if you are adjusting a style part  voice then ckobu is correct. But if as you seem to say you are adjusting a right voice (or even the left voice) that won't work. You need to memorise the new settings to the appropriate OTS, (push memorise then one of the OTS buttons) after which the KB asks if you want to save the OTS. If you have more adjustments to make, say  NO and do those first, and when ready to save and after being asked again, say YES.
John



Toril S

Thanks John. Yes, it was a voice in the OTS that was too low. When I saved tha style again ALL OTSs got the same voice. And now the voice has gone back to low again. So I must be doing something wrong. People do this all the time on the forum, but I am just confused...
Toril S

Genos, Tyros 5, PSR S975, PSR 2100
and PSR-47.
Former keyboards: PSR-S970.

https://www.youtube.com/channel/UCLVwWdb36Yd3LMBjAnm6pTQ?view_as=subscriber



Toril's PSR Performer Page

Toril S

Solved! I didn't need the style creator to change the volume of the voice in the OTS, just adjusted it in the mixer and saved the OTS again. Thanks friends for your help :)
Toril S

Genos, Tyros 5, PSR S975, PSR 2100
and PSR-47.
Former keyboards: PSR-S970.

https://www.youtube.com/channel/UCLVwWdb36Yd3LMBjAnm6pTQ?view_as=subscriber



Toril's PSR Performer Page

ckobu

Hi Toril, I misunderstood you. John is right. Creating an OTS is simple.

1.press Memory
2. choose OTS
3. confirm YES
4. enter a new name (a new Style is created) or leave the old (rewritten Style)
5. OK

Watch my video channel

Toril S

ckobu, thanks :) I thought I had to use style creator to save a change in the volume of a voice in OTS, but it all works now.
Toril S

Genos, Tyros 5, PSR S975, PSR 2100
and PSR-47.
Former keyboards: PSR-S970.

https://www.youtube.com/channel/UCLVwWdb36Yd3LMBjAnm6pTQ?view_as=subscriber



Toril's PSR Performer Page

dinapoli

I use the REGISTRATIONS.  I load the style in a registration, change Volume of all the parts, change anything else I want such as changing instruments , microphone, Harmony etc. then just save it to a registration.  Sometimes I change the same style with different instruments variation, right hand instruments etc.

Toril S

Toril S

Genos, Tyros 5, PSR S975, PSR 2100
and PSR-47.
Former keyboards: PSR-S970.

https://www.youtube.com/channel/UCLVwWdb36Yd3LMBjAnm6pTQ?view_as=subscriber



Toril's PSR Performer Page