News:

PSR Tutorial Forum is Now Back to Life!

Main Menu

Psr670 Variation buttons

Started by Dave Read, September 02, 2018, 05:33:37 AM

Previous topic - Next topic

Dave Read

I have a problem with the variation buttons on my psrs670.When you change from one variation to another there is a two second delay before it changes. Can anyone help please.
Thanks
Dave

AlBags


Hi D
You best post back with exactly what style/voices you have loaded, and what change in variations you are talking about.
Then, I'm sure someone will help you!

Also, this should be in a specific thread ..
Here ..
https://www.psrtutorial.com/forum/index.php/board,68.0.html
Roger, or someone will probably move it for you.

Al.
😊  I started out with nothing .. and I've got most of it left!  😊

🎹 Tyros 5-76,  now the brilliant Genos 🎹
Genelec 8030C Studio Monitors on K&M stands
K&M Spider Pro Stand, K&M Accessories. I love K&M!

tyrosaurus

Hi Dave,

If you press a style variation button any time other than during the first beat of a bar (i.e. while the beat counter still shows '1'), the variation won't change until the start of the next bar.  This is normal behaviour.

Could this be what you are experiencing?


Regards

Ian

Dave Read

Thanks for your reply Ian . Even if I make sure that I change the variation on the first beat of the  bar there is still a delay

Fred Smith

Quote from: Dave Read on September 02, 2018, 09:47:11 AM
Thanks for your reply Ian . Even if I make sure that I change the variation on the first beat of the  bar there is still a delay

There shouldn't be a delay in that case.

So when does the new variation start? At the start of the next bar, or somewhere else?
Are you triggering a fill when you change the variation?
Are you changing the OTS at the same time (= OTS Link on). If so, there's a setting for OTS Change behaviour that you may need to adjust.

Hope this helps,
Fred
Fred Smith,
Saskatoon, SK
Sun Lakes, AZ
Genos, Bose L1 compacts, Finale 2015
Check out my Registration Lessons

AlBags


This is why I asked the questions I did, earlier today

Al.
😊  I started out with nothing .. and I've got most of it left!  😊

🎹 Tyros 5-76,  now the brilliant Genos 🎹
Genelec 8030C Studio Monitors on K&M stands
K&M Spider Pro Stand, K&M Accessories. I love K&M!

Normanfernandez

Quote from: Dave Read on September 02, 2018, 05:33:37 AM
I have a problem with the variation buttons on my psrs670.When you change from one variation to another there is a two second delay before it changes. Can anyone help please.
Thanks
Dave
Can you send a Audio Recoding ?
We'll be able to understand much better
Norman Fernandez Keyboardplayer
https://www.youtube.com/channel/UCngm8h5k5NmKnowJpkxlDBQ

PSR S770 - Roland FP 30 - PSR 280
Cubase - Kontakt6

Dave Read

Thank you all for your replies. Yes Fred the 0.t.s is on. As far as sending an audio recording I would not know where to start
Dave

Fred Smith

Quote from: Dave Read on September 03, 2018, 02:42:31 AM
Thank you all for your replies. Yes Fred the 0.t.s is on. As far as sending an audio recording I would not know where to start
Dave

Ok. Then you need to check your settings. See page 23 of the Reference Manual.

Check Function>Menu 1>Style Setting>OTS Link Timing.

When you get a chance to answer the other questions, let us know.

Cheers,
Fred
Fred Smith,
Saskatoon, SK
Sun Lakes, AZ
Genos, Bose L1 compacts, Finale 2015
Check out my Registration Lessons

Dave Read

Thank you all again, I think that I've  solved the problem. I did a system set up factory reset and it seems to have cured the problem
Thanks again
Dave