My s910 pb not correctly working.when I play a chord from auto accompany  it is not match Right part chord
It is semi tone error.
I clean pb also
Factory reseted but yet same problem.

However I zero pb range from mix console then work correctly

But if give 2semi tone pb range again same problem.

How I fix diz pleeeesssssszzz.

Hi ArunaBandara,
I have got an s750.
From default I can see that the Pitch Bend in all voices gives +2 semitones.
I couldn't find a way to change this to +1 semitone by default on my model.
So to keep the +1 semitone(and not 2 semitones),
I press Direct Access and press the Pitch Bend to call the Mixing Console to change the pitch bend semitone and save it either at the OTS voices(as a new user style) or on a Registration.

Maybe there is a system function on your s910 for the pitch bend range for all voices?
Have you checked there?

Hello friend, I saw your comment, the same thing is happening to me as your prs, how did you solve it? Thanks

A master system reset should solve your problem.

Good luck,

Gary

Hi Mr. Gary, I have tried all 2 possible resets.
The 1 pressing the last key.
The 2 restarting it from system.
But it seems that a third reboot, called internal test, but I don't know how to do it, maybe you know how to do it in advance, thank you very much.

The test is relatively easy to conduct.

1. Turn off the keyboard.

2 Press C2#, F2, G2# (all three together) and while keeping them depressed,

3 switch the power on - you will see "TEST" on the display.

With the tempo -/+ button you can then toggle through the various tests to be performed. The Start/Stop button will start the test. Be sure to wait till all the tests have been completed.

Hope this helps,

Gary

Hello Mr. Gary, could the test solve my problem?
I'll try it tomorrow. Thank you very much.

Or is it to locate the fault?

It will not solve the problem - it will only tell you if you have a problem and where it is located.

Good luck,

Gary

Hello Mr. Gary, your contribution is very valuable, it helped me to solve my problem, thank you very much.

Glad I was able to help.

Good luck,

Gary

Hello friends, the exact same problem happened to me, I tried to restart everything, etc.
The problem was the potentiometer of the pitch, I disconnected it and put an application that I downloaded from the playstore, which I control the pitch with my cell phone and it works perfectly, I hope it helps, thanks.