Fantastic, Simple Easy Yamaha Midi to Style!!

[robinez]

Please can you share this styles made by an expert musician just to know how it sounds on the Genos1...?

Many thanks in advance...!

I will do better, I will create a tutorial where I will show how to create these styles in realtime with the software.
there are some tricks you need to know to get the most out of it, but once you know them the end results are fantastic.

[pjd]

Do you know what the p number (p2 or p3) is for in the voice list file? How do you decide which p number to assign to each bank of voices?

Hi Roy --

It has to do with the nesting of the category/subcategory/voice data.

[g1] markers are the tip-top of the nesting. They are followed by [p2] markers for the voices just below the [g1] level.

EnsemblePart is at the [g1] level. It is separated into sub-categories which are each marked [g2]. Voices in each [g2] sub-category are marker [p3].

Legacy is at the [g1] level. It is separated into sub-categores which are each marked [g2]. Voices in each [g2] sub-category are marked [p3].

Once you see this pattern, it's lather, rinse, repeat. 

I think the programmer(s) were too lazy to have a parseable nested substructure like XML. 

All the best -- pj

Hey, hey, Vali -- thanks for doing the CVP-900! Good to see you on the job, my friend.

[rphillipchuk]

I will do better, I will create a tutorial where I will show how to create these styles in realtime with the software.

That would be "AWESOME" as your tutorials are legendary and also very well done !!!!

[Jim]

    "Dang it all.  I just saw that it's only for Windows 10 and 11 which leaves me out.  Oh, well....."


Hi Jim
It is for the Mac also - works as expected on both.
Bill

Thanks, Bill, but I don't have a Mac.  My PC OS's are Windows 7 and 8.1
Jim

[RoyB]

Thanks pj for the explanation. I already understood the [g#] nesting but hadn't linked the [p#] identifiers to nesting.

Regards

Roy

[jazzy_beat]

I will do better, I will create a tutorial where I will show how to create these styles in realtime with the software.
there are some tricks you need to know to get the most out of it, but once you know them the end results are fantastic.

Many thanks Qui Robinez, I will look for your tutorial.

[Del]

Well this simple easy Yamaha Midi to Style does not work for me.

I have downloaded to my PC but cannot open it am I missing something?

Del

[Lee Batchelor]

Well this simple easy Yamaha Midi to Style does not work for me.

I have downloaded to my PC but cannot open it am I missing something?

Del

Let's start with the basics. Did you unzip the files, Del? Double clicking the zip folder won't work.

[vlbrgt]

I will do better, I will create a tutorial where I will show how to create these styles in realtime with the software.
there are some tricks you need to know to get the most out of it, but once you know them the end results are fantastic.

Thanks. I'm looking forward to see the tutorials.
Regards
Etienne

[Del]

Let's start with the basics. Did you unzip the files, Del? Double clicking the zip folder won't work.

Hi Lee yes I un-zipped the files using winzip then I installed the file, tried to open the file and it will not open

Del

[JohnS (Ugawoga)]

Hi Lee
You can buy midi files all over the place and also get free ones when you look around.
A lot of free midi files are pretty dire.
Why not make your own midi file and then convert it.
If you purchase midi file ,you can change them to your own liking in Cubase.
Get into the piano roll area and you are away
Sky is the limit now.
I am hope to pick up the new Genos 2  next coming week.

All the Best
John                           

[Patrick]

Hello i've discovered this afternoon that a lot of midi files are not XG optimised and they are not a % compatibility with ours keyboards; to use the new (Yamaha midi song to style), its very important that the midi is XG optmised and that your keyboard have the voices used in that midi file.

You must use "PSRUTI" to optimise XG the midi and to revoice the midi files with the voices of your PSR SX900;
PSRUTI when the midi file is opened, will clean the midi of all the unwanted notes, ....!
Then you've to optimize XG the midi file corrected.

NB: you have to import your instrument definition of "cakewalk" for SX900 (for example) as the PSRUTI software will use the voices of the midi you want to convert in styles. In PSRUTI you can sea in witch Key the midi song is recorded.

When you've your midi corrected and it have the correct voices,  you can try to convert it in style!

All the best and have a great weekend, cheers Patrick 

PS: perhaps i'm wrong!

[Des O]

Hello i've discovered this afternoon that a lot of midi files are not XG optimised and they are not a % compatibility with ours keyboards; to use the new (Yamaha midi song to style), its very important that the midi is XG optmised and that your keyboard have the voices used in that midi file.

You must use "PSRUTI" to optimise XG the midi and to revoice the midi files with the voices of your PSR SX900;
PSRUTI when the midi file is opened, will clean the midi of all the unwanted notes, ....!
Then you've to optimize XG the midi file corrected.

NB: you have to import your instrument definition of "cakewalk" for SX900 (for example) as the PSRUTI software will use the voices of the midi you want to convert in styles. In PSRUTI you can sea in witch Key the midi song is recorded.

When you've your midi corrected and it have the correct voices,  you can try to convert it in style!

All the best and have a great weekend, cheers Patrick 

PS: perhaps i'm wrong!

Thanks Patrick
I am going to try this today to put the best in to get the best out.
First run the midi file through PSRTuti to correct, convert key to C and see if that helps.
Then run it through Yamahas Megaenhancer to use the special voices on genos.
All programmes loaded with the keyboard definitions
Then through Midi to Style.
80% have already done a good job on M2F but for those that don't seem right.

Des

[Lee Batchelor]

Hi Lee yes I un-zipped the files using winzip then I installed the file, tried to open the file and it will not open

Del

Hi Del, That's a real mystery. The only thing I can think of is to right-click the .exe file and choose Run as administrator and see what happens. Anyone else have an idea?

Del, perhaps turn off all antivirus software including Windows Defender if you're using it. I assume you're running a PC? Perhaps post the specs?

[Del]

Hi Lee
Yes I also tried run as administrator, I have not tried turning off windows defender or the Malware bytes and a bit reluctant to do that, I was wondering if someone has already downloaded it and has it working they could send the exe file say like on Box and sent it to me through messages here, maybe that might work.
I have Core i5 with 16gb ram windows 10 64bit

I have down loaded this several times and it still does not work? any PC guru's out there who would have an idea as to why it wont open?

Del

[Lee Batchelor]

Hi Lee
Yes I also tried run as administrator, I have not tried turning off windows defender or the Malware bytes and a bit reluctant to do that, I was wondering if someone has already downloaded it and has it working they could send the exe file say like on Box and sent it to me through messages here, maybe that might work.
I have Core i5 with 16gb ram windows 10 64bit

I have down loaded this several times and it still does not work? any PC guru's out there who would have an idea as to why it wont open?

Del

That beats me, Del . You've done everything right. The only thing I can think of is when the file was unzipped, it became corrupted. What utility did you use to unzip it?

Edit
Did you try deleting the download files and downloading them again? It's possible the downloaded files could get corrupted during the download. Usually a server side error. Try that first.

Edit 2
Try saving the download zip file to the root directory - for example C:\. Sometimes the unzipping software does strange things when the saving path is long.

[Bill]

Hi Del

You say that you have installed it on your PC.
if so: 
go to the OS Section under your name.
Find the Program(x86) folder and click it.
at the bottom of the list you should see "Yamaha" click it.
You should see a folder called "MIDI Song to Style"
You should see the EXE file, then click it.

If you have not got the above:
Go to your download folder and look for another folder called "Midi to Style_Win. Click on it.
Now doble click the file Setup Midi to Style.exe file
follow the instruction as they appear.

Let us know what error messages you get.

Regards

Bill

[Lee Batchelor]

Thanks, Bill. I'm out of ideas but it looks like I was on the right track .

[Bill]

I will do better, I will create a tutorial where I will show how to create these styles in realtime with the software.
there are some tricks you need to know to get the most out of it, but once you know them the end results are fantastic.

Hi Qui

Many thanks for the excellent Youtube Video.  We really do appreciate the effort you take for ALL your video's.

Regards


Bill

[Del]

Hi Bill & Lee
Thank you both for your help this is what I have done:
Downloaded the Midi-style from Yamaha Site - this got saved to my downloads folder
Went to Download folder - Unzipped the File with Winzip and I have also tried IZArc which both unzipped the file
The exe file is now in the download folder I have double clicked the exe file which then puts it into my programs OS system, I have also tried to open the exe file by right clicking and selecting open.
The Program is now sitting in my programs folder where I can access it by clicking the start button and the file is in a folder called Yamaha.
I click on the program icon to launch it and it is pinned to the task bar but the program will not open to the screen where it says to drop the midi file.
I am really baffled to why this does not work I have tried at least 8 time now
This is normally How I install programs and don't have this problem.

Del

[Des O]

Hi Bill & Lee
Thank you both for your help this is what I have done:
Downloaded the Midi-style from Yamaha Site - this got saved to my downloads folder
Went to Download folder - Unzipped the File with Winzip and I have also tried IZArc which both unzipped the file
The exe file is now in the download folder I have double clicked the exe file which then puts it into my programs OS system, I have also tried to open the exe file by right clicking and selecting open.
The Program is now sitting in my programs folder where I can access it by clicking the start button and the file is in a folder called Yamaha.
I click on the program icon to launch it and it is pinned to the task bar but the program will not open to the screen where it says to drop the midi file.
I am really baffled to why this does not work I have tried at least 8 time now
This is normally How I install programs and don't have this problem.

Del

It could be the file you have downloaded is corrupted or your anti virus is blocking it if you have.
If you using Windows make sure you download the Windows file and not the mac, visa versa. Also create a shortcut on your desktop when it asks you when installing. Make sure you install as administrator right click when installing and select install as admin.

[Divemaster]

    "Dang it all.  I just saw that it's only for Windows 10 and 11 which leaves me out.  Oh, well....."


Hi Jim
It is for the Mac also - works as expected on both.
Bill

Thanks, Bill, but I don't have a Mac.  My PC OS's are Windows 7 and 8.1
Jim

You probably know this anyway, but.... You can upgrade to Windows 10 absolutely free should you wish to. Microsoft have an update page especially to enable you to do it. 😊

Keith

[PhotoDoc05]

Hope you don't mind me just jumping in here, but is it possibly opening the program off of your current screen?

After launching the MIDI Style program, Try checking your Task Manager, and see if the program is possibly running in memory?

I've had something like this happen to other programs, I'm using 2 monitors, and sometimes things get thrown "off screen".

Jerry

[Del]

Have ensured I have downloaded the correct file and by using administrator, when the program downloads into the program folder it automatically creates a shortcut on the desktop.
I looked in the task manager and the program is running but I cannot get it displayed off the task bar.
I also hovered the mouse cursor over the midi-style icon on the task bar and I could see the screen where you drag the midi file, but I cannot launch it of the task bar to view it


It's Beaten Me

[PhotoDoc05]

OK Del,

Well, sounds like it may just be "off screen".

Try this:  https://www.wikihow.com/Bring-an-Off-Screen-Window-Back-on-Windows#:~:text=Press%20and%20hold%20the%20Win,Choose%20a%20smaller%20resolution.

Jerry

[Del]

Hi Jerry
Yep I tried that and I used the Alt Tab method an yes it does change from one screen to the but does not lock onto the midi-style screen so it will not change
I tried alt tab between an addition program expansion manager, this forum and the midi-style, I could alt tab and lock onto this forum screen and expansion manager it would not allow me to on the midi-style program.
Seems like my pc dont like my pc

[PhotoDoc05]

OK,

Well that confirms the program is running, and the program is off screen.

In the Wiki article, have you tried Method 1?     Alt-Tab is not enough, use Method 1 from the article, using the Win-key and arrows.

Jerry

[Des O]

Hi Everyone,
Once you have installed the programme and need instructions Robinez has made a very informative video on how to.

https://www.youtube.com/watch?v=TRgZ5nE715c

[Lee Batchelor]

Dumb question, Del. I have re-started your PC? Doing so turns off every running process and places your PC at square 1, so to speak.

[Del]

Hi Jerry
Well I rebooted the PC and tried the Windows Key and the arrows and that worked however it seems I have to do this every time I want to use the program as it will not lock in the centre of the screen when I have shut it down and reopen, I guess I can live with it like this.
Thank you for you input it has at least got me further and Thank you Lee and Bill for your input as well, I have never know anything like this before, but hey we get tp learn new things everyday

thanks again
Del