Shortcuts to toggle between Styles Creator and Mixer

[MusicMan]

Hi

When I want to set a Voice, Channel Volume, Channel Panning, etc for a channel, individually for each Variation, the method I use is to first go to Style Creator. Then once in Style Creator, I go to the Mixer by going to Menu 1 > Mixer. Then after I make the changes in the Mixer for each variation, to get back into Style Creator, I press the Exit button twice (1st to exit the Mixer, 2nd to exit Menu 1). This puts me back in Style Creator.

Are there shortcuts that I could use to toggle between Style Creator and Mixer? Shortcuts would really speed up my workflow.

I tried setting assignable button A to Mixer and Assignable button B to Style Creator but once I am in Style Creator, the Assignable buttons do not work.

Thank You for any help

[Michael Trigoboff]

You might be able to use the DIRECT ACCESS button. See page 120 of the Owner's Manual.

[BogdanH]

When I want to set a Voice, Channel Volume, Channel Panning, etc for a channel, individually for each Variation, the method I use is to first go to Style Creator.
Then once in Style Creator,..

-ok.

.. I go to the Mixer by going to Menu 1 > Mixer.

-while you're inside Style Creator, why don't you just press Mixer/EQ button (on the left side of display)?
In that case, after you're done in mixer, you just close the mixer and you will automatically land back inside Style Creator (to save your work).

I apologize if I missed the point of your question.

Bogdan

PS. Sorry, I had PSR keyboard in mind -I just realized Genos doesn't have Mixer/EQ button on panel.

[MusicMan]

Nice tries. LOL

[overover]

Hi MusicMan,

As already mentioned by Michael, in the Genos Owner's Manual on page 120 you will find the possible Direct Access shortcuts to open "Mixer > Style page".

With [Direct Access] > [Intro 3] you can e.g. open the Mixer to adjust the Volumes of the Style parts.


Best regards,
Chris

[MusicMan]

Ok. I'll try Direct Access for the Mixer and test whether it opens the mixer from Style Creator when I get home.

Thank you

[jwyvern]

Rather than Ending 3, to minimise extra button presses use Direct Action followed by Ending 1 or 2, which take you directly to style mixing. (Ending 3 takes you to the Master section of Mixer).

John

[MusicMan]

Hi MusicMan,

As already mentioned by Michael, in the Genos Owner's Manual on page 120 you will find the possible Direct Access shortcuts to open "Mixer > Style page".

With [Direct Access] > [Intro 3] you can e.g. open the Mixer to adjust the Volumes of the Style parts.


Best regards,
Chris

This is exactly what I was looking for...
Direct Access + Ending I to go to the Mixer.
Then to get back to Style Creator from the Mixer, I press Exit.

Perfect!

Thank You

[overover]

Rather than Ending 3, to minimise extra button presses use Direct Action followed by Ending 1 or 2, which take you directly to style mixing. (Ending 3 takes you to the Master section of Mixer).

John

Hi John,

I had suggested using INTRO 3 (not ENDING 3).

[D/A] > [Ending 1/2] can of course also be used (opens "Mixer > Style page > EQ Hi/Lo").

[D/A] > [Intro 3], on the other hand, opens, as mentioned, "Mixer > Style page > Volume".


Best regards,
Chris

[overover]

This is exactly what I was looking for...
Direct Access + Ending I to go to the Mixer.
Then to get back to Style Creator from the Mixer, I press Exit.

Perfect!

Thank You

Thanks for your feedback, MusicMan!

I'm glad to could help you.


Best regards,
Chris

[MusicMan]

 

Hi John,

I had suggested using INTRO 3 (not ENDING 3).

[D/A] > [Ending 1/2] can of course also be used (opens "Mixer > Style page > EQ Hi/Lo").

[D/A] > [Intro 3], on the other hand, opens, as mentioned, "Mixer > Style page > Volume".


Best regards,
Chris

Absolutely, thanks for the refinement of the shortcut.
I found the details on page 120 of the manual for how to go to a specific page of the mixer.

[overover]

Hi MusicMan,

A small note:

Your last post doesn't display the quoted text properly because the [quote⁣] tags are incorrect. Please edit your post by clicking the "Modify" button, then change the first tag from [⁣/quote⁣⁣] to [quote⁣] and save the modified post. The slash may only be used in the second ("closing") tag, but not in the "opening" tag.

Many thanks for your effort!


Best regards,
Chris

[MusicMan]

Ok Chris

I fixed the HTML tag.
Thank you for your help.