SX900 accessories – stand, expression and sustain pedal

[Lije Baley]

Hello!

I have a couple of questions regarding using the PSR-SX900 with an expression and sustain pedal. In preparation for this thread, I read the appropriate topics in the owner's manual and the reference manual. I own the SX900 but have not yet had opportunity to unpack it as I have not been feeling well for last week or so. During this time of being "out of touch", I am doing research on what accessories I need.

These are my questions:

1.   Do I even need a sustain pedal? I am not an experienced piano player but I would like to become decent at it. I have had formal musical training but with other instruments.
2.   What is the difference between a "footswitch" and a sustain pedal? They are both switches in a way, are they not?
3.   In reference to question #2, can I use a footswitch as a sustain pedal?
4.   Is there a particular footswitch or a sustain pedal you would recommend for the SX900? I have been looking at the Yamaha FC-4A and FC-3A. The -4A is a classic "ON/OFF" sustain pedal while the -3A has "half-press" functionality but according to my research, this function isn't supported by the SX900 anyway. However, the -3A can be used as two separate switches with the SX900.
5.   Do I even need an expression pedal? Reading through the manuals, I can see that an expression pedal can be used to control various parameters, like effects, filters and voice articulations within "Super Articulation Voices". But, can all of these parameters be assigned to the control knobs and used like that or do you think an expression pedal is how it should be done and doing it any other way will only lead to teaching myself the wrong technique?
6.   Which expression pedal would you recommend for the SX900? I have been looking at the Yamaha FC-7. It is a bit expensive but it also seems to have received good reviews and I assume it is high quality because it says "Made in Japan" on the bottom.
7.   Is there a particular brand of keyboard stand I should look at? It seems that the K&M brand is very popular but also pricey.  When I had the Roland GW-8, I owned a Proel stand and was not really happy with it. The stands I have been looking at in the same store I bought the SX900 didn't impress me either. What concerns me is the top surface on which the keyboards rests on. All of them have hard plastic and I'm afraid it will scratch the bottom surface of the keyboard. I would be really heartbroken if that happened.
8.   In reference to question #7, do you have any experiences with K&M "Omega" stands, namely the 18820 and 18810?

I welcome any suggestions you may have, thank you!

Cheers,
Antun

[Divemaster]

Hi Antun

Once you are feeling better, and have had the chance to unpack your new PSR-SX900 I would spend some time getting familiar with its many functions before buying any pedals. Then you will be in a better position to decide whether or even 'if' you need a pedal.

My previous instrument was a Yamaha Tyros, and although I sold it, I kept the Genuine Yamaha stand which is their L-7B model
which you can look up online. I've found it to be a very firm platform on which to fit my SX-700 which is the pretty well the same size as your new keyboard.

Although quite pricey as a new item, there are now plenty of them around on the second hand market, and I'd highly recommend this stand. It has adequate padding for the keyboard, but you can always add more.

I would, personally, avoid Scissor Type stands. they are never very stable, especially the cheaper ones, and the last thing you want is your expensive new keyboard ending up on the floor if you are playing something lively.

The only other item you'll need is some kind of stool. Again, choose carefully. some are as hard as rocks, with cheap foam construction, and some are very flimsy and uncomfortable to sit on.  You want to be comfortable when you are playing.

Your keyboard will come with the Instruction manual as standard, but if you look on the Yamaha website, there is another manual for your keyboard, (The REFERENCE Manual), which has a lot of information that you will need. You can download it as a pdf for reference. Here's the link, and it's right at the bottom of the screen.

https://uk.yamaha.com/en/products/musical_instruments/keyboards/arranger_workstations/psr-sx900/downloads.html#product-tabs

Hope that helps you to get started, and hope you feel well soon.
Keith

[lmederos]

I second the advice about avoiding the "x-shape" stands.

I prefer the "z-shape"; another highly rated option and cheaper than the Yamaha is this one:  https://www.sweetwater.com/store/detail/ZStd--on-stage-stands-ks7350-pro-heavy-duty-z-stand


Agree on the Reference Manual as being priceless.

[BOAC]

Hmm Pedals. I too a year back was a new user to Yamaha let alone the SX900.
Like you I have had formal training (5 decades ago) on another instrument, the piano, and thought it would be essential to have pedals. I still do but not for the actions that the default settings the SX900 gives them.
I firmly believe that when playing music hands should be on the notes, same place as the concentration.
Therefore I wanted a pedal for OVERALL VOLUME (I call that expression) and that can only be the FC7 (I chose YAMAHA because of quality) Google the ££
After a while playing I decided the other pedal was to be for REGISTRATION and that the FC4A was fine for that again Yamaha, again Google the ££

Having decided those would be my pedals and their 100% function you need to go into the menu and change the settings, that bit is easy, saving them so that they never change,, hmmm teachers out on that one,, some say it can be done,, some say not,, I'm still looking !
You asked what the difference was, look at it this way
The FC7 is a linier device its the same as a knob 0 -100%
The FC4 is a momentary switch, no contact / contact. (Ideal for single functions) (It is NOT an on/off switch)
Cheers Good Luck

[mikf]

If you want these settings saved for your pedals set them up that way in a registration. Then you hit that registration at start up and you have it. And if you ever decide to change one pedal to another setting, (and no matter what you think now, that will happen at some point)  just hit that registration to get back to your start up setting.
In fact you can include other preferred settings in your 'start up' registration - like for example fingering mode. Most of the experienced arranger players have a start up registration which sets the keyboard to their preferred set up.
Piano type sustain pedals are nice and heavy and don't move around so they are good even to use for simple contact switch purposes. Like start/stop accompaniment for example.
BTW, you seldom would want to use an expression pedal to control the whole volume of the keyboard, because then you would be also changing volume of the accompaniment. Typically people would use expression on the lead voice rather than the whole keyboard volume. Total volume is not actually something you should need to alter very much when playing, so the volume knob on the keyboard is usually fine for that.
Another point is that the accompaniment chord can be set to hold until you change chords, so with experience you will have time to move your lh to change settings between chord changes. Those hands don't need to be anchored to the keys.
Mike

[DerekA]

If you want to play solo piano I would definitely recommend using a sustain pedal. A 'footswitch' will do the same job. You don't need anything expensive, I use a Stagg model which is just fine for me.

[EileenL]

You can specify which parts you want the volume pedal to control. Just tick the boxes in the set up of volume pedal to what you want.

[Lije Baley]

Hi Antun

Once you are feeling better, and have had the chance to unpack your new PSR-SX900 I would spend some time getting familiar with its many functions before buying any pedals. Then you will be in a better position to decide whether or even 'if' you need a pedal.

My previous instrument was a Yamaha Tyros, and although I sold it, I kept the Genuine Yamaha stand which is their L-7B model
which you can look up online. I've found it to be a very firm platform on which to fit my SX-700 which is the pretty well the same size as your new keyboard.

Although quite pricey as a new item, there are now plenty of them around on the second hand market, and I'd highly recommend this stand. It has adequate padding for the keyboard, but you can always add more.

I would, personally, avoid Scissor Type stands. they are never very stable, especially the cheaper ones, and the last thing you want is your expensive new keyboard ending up on the floor if you are playing something lively.

The only other item you'll need is some kind of stool. Again, choose carefully. some are as hard as rocks, with cheap foam construction, and some are very flimsy and uncomfortable to sit on.  You want to be comfortable when you are playing.

Your keyboard will come with the Instruction manual as standard, but if you look on the Yamaha website, there is another manual for your keyboard, (The REFERENCE Manual), which has a lot of information that you will need. You can download it as a pdf for reference. Here's the link, and it's right at the bottom of the screen.

https://uk.yamaha.com/en/products/musical_instruments/keyboards/arranger_workstations/psr-sx900/downloads.html#product-tabs

Hope that helps you to get started, and hope you feel well soon.
Keith

Thank you so much for the kind wishes, Keith! It is much appreciated!

You are absolutely right – I can get the pedal if I need it. I'd like to learn to play the keys properly, first and foremost and for that I guess I don't need a pedal.

The advice on the stand is much appreciated as well – I will look for a Tyros stand, even though I must tell you I live in Croatia and I don't think many people could have afforded a Tyros. I will look all the same. If I may ask, why did you sell your Tyros and which version was it? I still have a Tyros 2 poster and ever since I got it, I've always wondered if I will ever own such a beautiful thing. It just struck me – while others had posters of supermodels and Lamborghinis, I had a poster of a Yamaha Tyros! Also, is the PSR-SX700 you own now an improvement on your Tyros? Sorry for the slight derail of the thread.

I don't like the "X" stands either. I have had one when I owned the Roland and though I was always careful not to tip the keyboard, the contact surface was quite simply hard plastic that offered very little friction between the stand and the keyboard so I was not at ease. In addition, it wasn't a very cheap stand at the time and I always found it surprising those contact surfaces weren't rubber. I was surprising because I own a guitar case from that same manufacturer and it is really quite excellent. The best one I've seen actually.

I haven't even considered I'll need a keyboard chair! I will look what's available and report back.

As for the reference manual, I downloaded it and you are right – it goes much more in depth than the owner's manual. I printed it out and am reading it while I'm in bed.

Thanks again, Keith! You are very kind.

All the best,
Antun

[Lije Baley]

I second the advice about avoiding the "x-shape" stands.

I prefer the "z-shape"; another highly rated option and cheaper than the Yamaha is this one:  https://www.sweetwater.com/store/detail/ZStd--on-stage-stands-ks7350-pro-heavy-duty-z-stand


Agree on the Reference Manual as being priceless.

Hi Luis and thanks for your contribution!

Right, the "X" stands are out. One thing I found unusual when I owned the Roland and a stand like this was that there was no room for legs! I mean, I had some Roland pedal at the time and it had to be in front of the stand which meant that I had to move away from the instrument to use it which, in turn, certainly didn't help me use it.

Thanks for welcoming me so warmly the other day, mate. It is much appreciated 😊

Cheers,
Antun

[Lije Baley]

Hmm Pedals. I too a year back was a new user to Yamaha let alone the SX900.
Like you I have had formal training (5 decades ago) on another instrument, the piano, and thought it would be essential to have pedals. I still do but not for the actions that the default settings the SX900 gives them.
I firmly believe that when playing music hands should be on the notes, same place as the concentration.
Therefore I wanted a pedal for OVERALL VOLUME (I call that expression) and that can only be the FC7 (I chose YAMAHA because of quality) Google the ££
After a while playing I decided the other pedal was to be for REGISTRATION and that the FC4A was fine for that again Yamaha, again Google the ££

Having decided those would be my pedals and their 100% function you need to go into the menu and change the settings, that bit is easy, saving them so that they never change,, hmmm teachers out on that one,, some say it can be done,, some say not,, I'm still looking !
You asked what the difference was, look at it this way
The FC7 is a linier device its the same as a knob 0 -100%
The FC4 is a momentary switch, no contact / contact. (Ideal for single functions) (It is NOT an on/off switch)
Cheers Good Luck

Hello!

Interesting points indeed! So, basically you have a Yamaha FC-7 for expression and FC-4A for registrations. I am still not clear on what an actual "registration" is but am intensively reading the manuals so I'll get to it. My guess it's an "image" of all of keyboard's settings that can be recalled instantly to accommodate a certain song. I think!

I see – so the expression pedal is like a "resistor" In that it can change a parameter gradually, from minimum to maximum, while the sustain pedal or a switch is simply a "button" that makes contact once you press it and loses contact once you release it. I am "as bright as the night" as they say but I think I'm getting the hang of it now! 😊

Cheers,
Antun

[Lije Baley]

If you want these settings saved for your pedals set them up that way in a registration. Then you hit that registration at start up and you have it. And if you ever decide to change one pedal to another setting, (and no matter what you think now, that will happen at some point)  just hit that registration to get back to your start up setting.
In fact you can include other preferred settings in your 'start up' registration - like for example fingering mode. Most of the experienced arranger players have a start up registration which sets the keyboard to their preferred set up.
Piano type sustain pedals are nice and heavy and don't move around so they are good even to use for simple contact switch purposes. Like start/stop accompaniment for example.
BTW, you seldom would want to use an expression pedal to control the whole volume of the keyboard, because then you would be also changing volume of the accompaniment. Typically people would use expression on the lead voice rather than the whole keyboard volume. Total volume is not actually something you should need to alter very much when playing, so the volume knob on the keyboard is usually fine for that.
Another point is that the accompaniment chord can be set to hold until you change chords, so with experience you will have time to move your lh to change settings between chord changes. Those hands don't need to be anchored to the keys.
Mike

Hi Mike and thanks for the contribution!

From your post I can tell you're an experienced user!

OK, a sustain pedal, due to its construction is somewhat better than a simple switch because, like you said, it's heavier and doesn't move around. I'll keep that in mind, thanks!

Also, I understand what you mean regarding the volume. Of course, there would be no point, at least for me, to control the volume of an entire mix (the style and the melody being played) with an expression pedal but rather just the melody being played, in-between the lyrics for example.

Also, dynamics and volume are a somewhat difficult thing to judge, especially if you're in an unknown venue, though this is not something I intend to do anytime soon. However, I have often found that it's a pretty good sign you've messed up the volume if you need to adjust it in-between the songs.

That's some good advice, Mike! Thank you!

Cheers,
Antun

[Lije Baley]

If you want to play solo piano I would definitely recommend using a sustain pedal. A 'footswitch' will do the same job. You don't need anything expensive, I use a Stagg model which is just fine for me.

Hi Derek!

Sure, no need to go overspending on the sustain pedal. I can always buy a higher quality one if I get better (I hope I do!).

Cheers,
Antun

[Lije Baley]

You can specify which parts you want the volume pedal to control. Just tick the boxes in the set up of volume pedal to what you want.

Hi Eileen!

That was going to be my next question, thank you!! It makes sense for a keyboard of this type to allow for that.

It's so fascinating an instrument like this can look so simple and yet be so complex at the same time. Yamaha looks "funky" to me but it utterly inspirational. Of course, I am looking at mine online – I haven't unpacked it yet!

Cheers,
Antun

[mikf]

Derek - I understand about saving cost, and if you are happy, that's fine. But realistically there is no comparison for piano playing between a Stagg type on /off foot switch and a real sustain pedal. These on/off pedals are designed for occasional switching by guitar players whereas a pianist will have is foot on the pedal almost all the time. The simulated piano pedals have built in springs and a lever action so you can 'feel'  the pedal on your foot. I believe you have a DGX so you probably play piano a lot. If so, do yourself a favor and invest in a real sustain pedal, the difference is huge for piano playing.
Mike

[Lije Baley]

Derek - I understand about saving cost, and if you are happy, that's fine. But realistically there is no comparison for piano playing between a Stagg type on /off foot switch and a real sustain pedal. These on/off pedals are designed for occasional switching by guitar players whereas a pianist will have is foot on the pedal almost all the time. The simulated piano pedals have built in springs and a lever action so you can 'feel'  the pedal on your foot. I believe you have a DGX so you probably play piano a lot. If so, do yourself a favor and invest in a real sustain pedal, the difference is huge for piano playing.
Mike

Hi Mike!

Can you please recommend a good sustain pedal? What do you think about the FC-3A and FC-4A from Yamaha and which one would you choose for the PSR-SX900?

I am asking about these two because that's what I can buy here. I find it odd that the FC-3A costs the same as the FC-4A when it also allows for half-press so I would have expected the FC-3A to cost more than the FC-4A, unless it is lower in quality in some way

Cheers,
Antun

[Divemaster]

Quote.....The advice on the stand is much appreciated as well – I will look for a Tyros stand, even though I must tell you I live in Croatia and I don't think many people could have afforded a Tyros. I will look all the same. If I may ask, why did you sell your Tyros and which version was it? I still have a Tyros 2 poster and ever since I got it, I've always wondered if I will ever own such a beautiful thing. It just struck me – while others had posters of supermodels and Lamborghinis, I had a poster of a Yamaha Tyros! Also, is the PSR-SX700 you own now an improvement on your Tyros? Sorry for the slight derail of the thread.

Hi again Antun

I had an original Tyros (Tyros 1) that served me well for many years. The Tyros keyboards are superb, and I enjoyed playing it and learning  from its many features.

But like every musical instrument, especially electrical ones, technology moves ever on, and the Tyros was getting older......2008....That's 14 years old now.....With age comes possible unreliability, component failure and even complete failure of the keyboard itself.

The SX range is superb. The technology is worlds apart and so much more advanced than the Tyros, but the greatest thing, as far as I am concerned is that it is a One Piece keyboard.  Much as I loved my Tyros, they are heavy keyboards, and also need separate speakers systems. The touch screen on the SX700/900 series is wonderful.

There is NO comparison between a new SX900 and an ageing Tyros. The technology is amazing, the sounds are amazing, and it is, without doubt, the best keyboard I have ever owned.

[mikf]

When I had an electric piano attached to my arranger I used the Yamaha, which is perfectly fine. Over here the 3A generally does cost more as you would expect. I think they are identical build quality. I am sure there are alternatives which are also fine, but I have never tried them and over here the Yamaha costs under $30, so not much to be saved looking for an alternative. Currently I don't need one because the CVP has the pedals built in.
I agree with the point about the X stand not giving much knee room. It's even more of an issue when you use pedals.
Mike

[Lije Baley]

Hi again Antun

I had an original Tyros (Tyros 1) that served me well for many years. The Tyros keyboards are superb, and I enjoyed playing it and learning  from its many features.

But like every musical instrument, especially electrical ones, technology moves ever on, and the Tyros was getting older......2008....That's 14 years old now.....With age comes possible unreliability, component failure and even complete failure of the keyboard itself.

The SX range is superb. The technology is worlds apart and so much more advanced than the Tyros, but the greatest thing, as far as I am concerned is that it is a One Piece keyboard.  Much as I loved my Tyros, they are heavy keyboards, and also need separate speakers systems. The touch screen on the SX700/900 series is wonderful.

There is NO comparison between a new SX900 and an ageing Tyros. The technology is amazing, the sounds are amazing, and it is, without doubt, the best keyboard I have ever owned.

Hello!

That's really interesting! I still have the original Tyros brochure and I remember seeing it for the first time. Man, that was one ***y-looking instrument! I just wish they paid more attention to the aesthetic design. Not that the SX900 isn't pretty but it doesn't have the "flare" of Tyros IMHO.

The Tyros was quite a departure from the PSR-9000 Pro in terms of design and looks much better to me.

Cheers,
Antun

[Lije Baley]

When I had an electric piano attached to my arranger I used the Yamaha, which is perfectly fine. Over here the 3A generally does cost more as you would expect. I think they are identical build quality. I am sure there are alternatives which are also fine, but I have never tried them and over here the Yamaha costs under $30, so not much to be saved looking for an alternative. Currently I don't need one because the CVP has the pedals built in.
I agree with the point about the X stand not giving much knee room. It's even more of an issue when you use pedals.
Mike

Hi Mike!

Sure, X-stands are very inconvenient.

Well, if the Yamaha pedal costs 30 dollars in your area, you're lucky! Over here it costs 80 Euros!

OK, so would you then say the FC-3A is a better choice than the FC-4A to use with the SX900?

Cheers,
Antun

[mikf]

Not for me because I have never used half pedaling. And probably neither will you or most other arranger players.
$80 for a simple pedal - that's a bit crazy.
Mike

[Lije Baley]

Not for me because I have never used half pedaling. And probably neither will you or most other arranger players.
$80 for a simple pedal - that's a bit crazy.
Mike

Hi Mike!

Sure, I agree, the prices are crazy. But because Euro is higher than a dollar, that actually amounts to 90 dollars! You have two choices - to buy it or not to buy it.

The half-pedalling feature though, if you se the pedal as a switch, you can control two parameters instead of one with a pedal like this, right? I noticed it has a TRS jack instead of a TS jack.

Cheers,
Antun

[Amwilburn]

There is little point getting an FC3; the PSRsx900 doesn't support half pedalling. (At least my PSRs970 didn't, so I assume the same applied to the sx900. I haven't actually tested it on the sx900, but even if it has it, how often do you use half damper?) However, you *could* use it to control pitch bend via a pedal, so you could keep both your hands on the keys (as seen in my Bohemian Rhapsody video during the guitar solo). It is incredibly inconvenient to use an FC3 as a volume pedal, so I don't recommend it for that.
https://www.youtube.com/watch?v=jlS6Hbs6aKA


Having only 2 pedal ports (unlike the Tyros/Genos with 3) requires you to know beforehand what the focus is. I would only purchase an FC7 volume pedal *if* I were using it for organ volume control (although it would also be convenient for string swells, too). At home I use and FC4 and an FC5; the FC5 is used to trigger either registration program changes (as seen in all my youtube videos) or, when I'm playing the guitar, the FC4 is sustain and the FC5 is body tap.

Mark

[mikf]

I don't believe you can control more one function with the FC3 and as the other poster says, SX900 doesn't support half pedaling anyway. No big loss.
Mike

[Toril S]

I use x stands for all my keyboards, good quality ones. They take little space, and are easy to use on gigs. The downside is that there is not so much room underneath. If you want to play piano you will need a sustain pedal. I have a volume pedal too, but must admit I have not used it much. Another thing, I have always wondered why musicians usually use stools/benches without a back rest! I think it is essential to be able to rest your back against a good back rest, but that is me.

[YammyFan]

Another thing, I have always wondered why musicians usually use stools/benches without a back rest! I think it is essential to be able to rest your back against a good back rest, but that is me.


I agree totally Toril    I tried a stool  30+ years ago and hated it. I would NEVER play without a back rest. Thanks for raising this issue. I'm glad I'm not alone. Yammyfan.

[Lije Baley]

There is little point getting an FC3; the PSRsx900 doesn't support half pedalling. (At least my PSRs970 didn't, so I assume the same applied to the sx900. I haven't actually tested it on the sx900, but even if it has it, how often do you use half damper?) However, you *could* use it to control pitch bend via a pedal, so you could keep both your hands on the keys (as seen in my Bohemian Rhapsody video during the guitar solo). It is incredibly inconvenient to use an FC3 as a volume pedal, so I don't recommend it for that.
https://www.youtube.com/watch?v=jlS6Hbs6aKA


Having only 2 pedal ports (unlike the Tyros/Genos with 3) requires you to know beforehand what the focus is. I would only purchase an FC7 volume pedal *if* I were using it for organ volume control (although it would also be convenient for string swells, too). At home I use and FC4 and an FC5; the FC5 is used to trigger either registration program changes (as seen in all my youtube videos) or, when I'm playing the guitar, the FC4 is sustain and the FC5 is body tap.

Mark

This is valuable advice Mark, thank you!

You are right, I "should" know what I'd be using it for beforehand and that's what makes it so difficult. For a beginner, it's not easy.

I will check out your videos, thanks for the link!

Cheers,
Antun

[Lije Baley]

I use x stands for all my keyboards, good quality ones. They take little space, and are easy to use on gigs. The downside is that there is not so much room underneath. If you want to play piano you will need a sustain pedal. I have a volume pedal too, but must admit I have not used it much. Another thing, I have always wondered why musicians usually use stools/benches without a back rest! I think it is essential to be able to rest your back against a good back rest, but that is me.

Hi Toril!

Yes, I agree that I will probably want a proper sustain pedal because learning to play a piano is something I really want to do.

I suppose one of the reasons they piano benches don't have back rests is because piano players like to "move along with the music". But it's strange there are NO piano benches with a back rest, at least not that I have seen. I definitely agree that for someone who sits in front of an instrument for hours on end, whether practicing or trying to compose something, a back rest could be useful. Definitely!

I think I should probably buy a sustain pedal, for now. Then, as I (hopefully) progress, I will likely be more able to make a decision whether I need something else.

Cheers,
Antun

[Lije Baley]

I agree totally Toril    I tried a stool  30+ years ago and hated it. I would NEVER play without a back rest. Thanks for raising this issue. I'm glad I'm not alone. Yammyfan.

Hello!

So, you too would recommed a back rest? Is there a particular bench you would recommend today?

Cheers,
Antun

[Bernie9]

For what it's worth, I just bought a Soroco sustain pedal from Amazon and it made a world of difference on my SX900 piano sounds. I am not a piano player per se, but used an old square box to get sustain.  I agree that a proper pedal is definitely needed.

[Lije Baley]

For what it's worth, I just bought a Soroco sustain pedal from Amazon and it made a world of difference on my SX900 piano sounds. I am not a piano player per se, but used an old square box to get sustain.  I agree that a proper pedal is definitely needed.

Hi Bernie!

Thank you for your comment! I look at it this way - a real piano has a sustain pedal so if my goal is to actually learn how to play a piano, then I should probably buy a sustain pedal.

There is no Amazon in Croatia so I am somewhat limited to the very few music stores left or online stores within EU because of high taxes and shipping expenses. Lucjily, Thomann has a vast selection of products even though it isn't the cheapest.

For now, my top contender for a sustain pedal is the Yamaha FC-4A because of good reviews and "guaranteed" compatibility with the SX900. It's 80 € though so again, not cheap but I hope it's also high quality and lasts a long time. But I will certainly look at others as well and read more reviews (I usually read reviews with the least  number of stars i.e. negative reviews).

Cheers,
Antun