tyros not changing chords .

[Biglou#1545]

 Anyone with any ideas what the problem is with my tyros 4 . When using the pre set styles it plays the first chord but does not change when I change . Any info is appriciated .

[Fred Smith]

Anyone with any ideas what the problem is with my tyros 4 . When using the pre set styles it plays the first chord but does not change when I change . Any info is appriciated .

What are your split and fingering settings?

Cheers,
Fred

[Biglou#1545]

 my position is F# and playing fingered chords but also tried it single finger . same results .

[overover]

my position is F# and playing fingered chords but also tried it single finger . same results .

Hi Biglou,

Maybe the Style split point is set too low. Please make sure that both Style and Left split points are set to F#2. (The Right3 split point is G2 by default.)

If the Style split point is set lower than the Left split point, this defines an extra keyboard area for the Left part.


Best regards,
Chris

[Biglou#1545]

 Thank you so much . resolved the problem . It appears I to learn about keyboards .

[overover]

Thank you so much . resolved the problem . It appears I to learn about keyboards .

Hi Biglou,

I'm glad to hear that the problem could be solved.

By the way, please note that split point and fingering settings can be changed by Registrations (if they contain different settings).

To avoid this you can lock split points and/or fingering in "Parameter Lock" (Function > Utility > Config1). Important: Close any settings display by pressing the EXIT button to save the changes.

Note: Of course, you can change split points and fingering directly in the relevant setting displays even if the corresponding checkboxes are ticked in the "Parameter Lock" display.


Best regards,
Chris