I am having difficulty posting!!

sugarplumsss · February 28, 2018, 01:54:17 AM

I am having difficulty posting!!

Just trying a different section to see if it is any better here!

sugarplumsss · February 28, 2018, 02:03:51 AM

While I was able to post here... when I tried to add a second post,,, I received the same message about... error no subject

Roger Brenizer · February 28, 2018, 02:18:24 AM

What board did you receive the error message in before, John?

panos · February 28, 2018, 08:51:04 AM

maybe that one
https://www.psrtutorial.com/forum/index.php/topic,43358.msg342555.html#msg342555

Roger Brenizer · February 28, 2018, 09:18:38 AM

John's comment posted in that topic, Panos. I'm working on the issue.

sugarplumsss · February 28, 2018, 09:48:55 AM

Quote from: Roger Brenizer on February 28, 2018, 02:18:24 AM
What board did you receive the error message in before, John?

Error message on the T4 board. Maybe even the Genos boards, but I cannot recall.. but definitely hit and miss ( mostly miss ) on the T4 board.

Thank you for addressing this.

OT I spoke to Yamaha tech support today, and I gleaned that the new Genos is quite a bit more complicated than the Tyros line!!

Roger Brenizer · February 28, 2018, 09:59:20 AM

Thank you for letting me know, John. I was following your posts on the T4 board.

Gunnar Jonny · February 28, 2018, 12:40:03 PM

This message appear when try post at Genos forum:

The following error or errors occurred while posting this message:
The message body was left empty.

If this post show here now, it works in this part now, but did not earlier today.
Same message in several forum I tested.

valimaties · February 28, 2018, 02:00:42 PM

Quote from: Gunnar Jonny on February 28, 2018, 12:40:03 PM
This message appear when try post at Genos forum:

The following error or errors occurred while posting this message:
The message body was left empty.

If this post show here now, it works in this part now, but did not earlier today.
Same message in several forum I tested.

It happened to me yesterday, when I was intended to post a code in page... (THIS post)
After I wrote that code from picture in my PC and after I've replaced code with picture, I could post!

Regards,
Vali

valimaties · February 28, 2018, 04:42:09 PM

It happens now ... pffff

Gunnar Jonny · February 28, 2018, 04:45:13 PM

I get the same message even with text in message field. Very strange.
If this message post, then the 'fault' is not static/permanent, but variable.

panos · February 28, 2018, 05:17:40 PM

Seems like a problem we encounter in different boards.

Just a suggestion untill the problem can be fixed in case you are going to post a text with many lines in it.
Before you click on "post" better save your text first,so you don't have to write it again.
e.g for mozilla which I am using: right click, select( or highlight) all and copy.
I had to re-write a post 3 times yesterday and it was something with many lines.

valimaties · February 28, 2018, 05:27:41 PM

Quote from: panos on February 28, 2018, 05:17:40 PM
Seems like a problem we encounter in different boards.
Just a suggestion untill the problem can be fixed in case you are going to post a text with many lines in it.
Before you click on "post" better save your text first,so you don't have to write it again.
e.g for mozilla which I am using: right click, select( or highlight) all and copy.
I had to re-write a post 3 times yesterday and it was something with many lines.

If you press Back on your browser, even if you get a "confirmation error" page, press again Back and you'll have your posting board again, with text inside!

(Almost of me it's working)

Regards,
Vali

Roger Brenizer · February 28, 2018, 10:25:39 PM

Please be patient, everyone. We're aware of this issue and as stated in another thread, we are actively pursuing a resolution to this problem.

Toril S · March 01, 2018, 12:43:21 AM

Hello

This is off topic, but could we get the spell check back please? The box opens, but there is no word library in there.

Roger Brenizer · March 01, 2018, 12:49:56 AM

We're working on that issue too, Toril.

travlin-easy · March 01, 2018, 01:23:36 AM

Rog, I went through some similar problems today. Additionally, I got a security warning when I tried to attach a photo. Weird!

Gary

Roger Brenizer · March 01, 2018, 01:56:21 AM

I saw all of the messages that were generated in the Forum Error Log for you, Gary. I'm trying to resolve this issue.

valimaties · March 01, 2018, 11:47:10 AM

I saw that also it changed the pagecode , as my diacritical from signature is changed to some strange characters ... Even if I edit signature and replace those characters with diacritic, after saving, will replace again with those characters!

Regards,
Vali

Toril S · March 01, 2018, 07:45:11 PM

And that happens here also. If I try to write a smily, some strange character comes out.

Gunnar Jonny · March 01, 2018, 08:51:49 PM

Test .... if start with special letters like " the erros message appears and not possible to post. So quote is also a problem.

Roger Brenizer · March 02, 2018, 02:04:04 AM

The problem is intermittent and not constant, so it's rather difficult to resolve this type of an issue. We're actively pursuing this problem.

Robert van Weersch · March 03, 2018, 09:12:04 AM

I'm having the same problem. Seems related to the length of the message.