live Bee Vabrato

[Keyboard Master]

h everyone here im sharing a pack containing a voice from tyros genos psr sx900 etc. for se in sx700 600 s960 770 a5000 etc, im sharing ot as a ppf file. you must load into yem then test it out https://drive.google.com/file/d/13CU5w5Z5qJMLdXsaA6fgYQkPCOhmDmzk/view?usp=share_link

[overover]

Hi Keyboard Master,

I imported your pack into the YEM and opened the voice "BeeVibrato" there by double-clicking it. I noticed the following:

- The samples are not looped, i.e. if you hold down any key, the sound breaks off after about 2 seconds.

- The same sample is used for C3 and C#3. This would not be a problem, but this sample is incorrectly edited: the sound increases by a semitone after about 2 seconds of holding down the mentioned keys (and only then stops).


Best regards,
Chris

[Keyboard Master]

Hi Keyboard Master,

I imported your pack into the YEM and opened the voice "BeeVibrato" there by double-clicking it. I noticed the following:

- The samples are not looped, i.e. if you hold down any key, the sound breaks off after about 2 seconds.

- The same sample is used for C3 and C#3. This would not be a problem, but this sample is incorrectly edited: the sound increases by a semitone after about 2 seconds of holding down the mentioned keys (and only then stops).


Best regards,
Chris

Thanks for the reply chris i appriciate your advise. now how can i set it to loop. i was wondering how to do it.

[overover]

Thanks for the reply chris i appriciate your advise. now how can i set it to loop. i was wondering how to do it.

Hi Keyboard Master,

You cannot loop samples in YEM, but you have to do this in a suitable wave editor program on the computer. Please note that only ONE loop point is supported.

One option would be the "good old" Yamaha TWE ("Tiny Wave Editor"):
>>> https://faq.yamaha.com/usa/s/article/U0001430

Another good free wave editor is "Wavosaur":
>>> https://www.wavosaur.com/download.php
>>> https://www.wavosaur.com/tutorials/how-to-make-a-loop/How%20to%20insert%20loop%20points.zip
>>> https://www.wavosaur.com/download/manual/Wavosaur%20quick%20start%20guide.pdf


Best regards,
Chris

[Keyboard Master]

Hi Keyboard Master,

You cannot loop samples in YEM, but you have to do this in a suitable wave editor program on the computer. Please note that only ONE loop point is supported.

One option would be the "good old" Yamaha TWE ("Tiny Wave Editor"):
>>> https://faq.yamaha.com/usa/s/article/U0001430

Another good free wave editor is "Wavosaur":
>>> https://www.wavosaur.com/download.php
>>> https://www.wavosaur.com/tutorials/how-to-make-a-loop/How%20to%20insert%20loop%20points.zip
>>> https://www.wavosaur.com/download/manual/Wavosaur%20quick%20start%20guide.pdf


Best regards,
Chris

Thanks Chris. I,ll Check these out.