Hold my hand please

[chesterkins]

I have downloaded all the data from my tyros 5 on to a USB drive as advised here ready to be loaded to my Genos
I would now appreciate step by step advice on loading this data into the right place and saving on my Genos
I have been used to the old copy and paste onto HDI of many years of Tyros
Appreciate any help you can give me to get it right first time so its lined up in the same way as MyT5

[tyrosman]

hi there this all depends on what you want to put in like Registrations Styles Multi pads excetra can you explain more

[overover]

I have downloaded all the data from my tyros 5 on to a USB drive as advised here ready to be loaded to my Genos
I would now appreciate step by step advice on loading this data into the right place and saving on my Genos
I have been used to the old copy and paste onto HDI of many years of Tyros
Appreciate any help you can give me to get it right first time so its lined up in the same way as MyT5

Hi chesterkins,

As already mentioned elsewhere: It is easiest if you work with the data directly from the USB stick. You copy all user data from the Tyros5 hard drive (HD1) in USB storage mode to a USB stick and leave this data on the stick. It doesn't matter which USB-to-Device socket you connect this USB stick to. It is only important that this stick is connected FIRST, so that it is recognized as "USB1".

The correct procedure for transferring the data from the Tyros5 hard disk to a USB stick is described in the two brochures "Genos Upgrade Guide" and "Easily Upgrade to Genos":
>>> https://uk.yamaha.com/en/products/musical_instruments/keyboards/arranger_workstations/genos/downloads.html


By the way, if you haven't already done so, please download the following Genos manuals in PDF format from the Genos download site linked above:
- Genos Owner's Manual "h0" V2.10
- Genos Reference Manual "h0" V2.10
- Genos Data List "f0 "V2.00)

Important: Please read the chapter "File Management" in the Genos Owner's Manual, starting on page 37.


Best regards,
Chris

[chesterkins]

Thanks I have managed to correctly copy the Tyros HD and it resires in USB1 now
so all is working there fine now
The problem I still have is the MF
I have copied the MFD from the T% and loaded it into the Genos as described
BUT it will not link up with styles on the USB
It will only link up with files iit likes in the preset styles
What to do?