Sub1 output

[sugarplumsss]

My earlier post was too general.

I have a gig tonight

Can the 1. 3 right hand ( right side of board )
2. the left hand ( left side )
3 the styles

all be routed to Sub1 
if so, how?
Thank you

[Fred Smith]

My earlier post was too general.

I have a gig tonight

Can the 1. 3 right hand ( right side of board )
2. the left hand ( left side )
3 the styles

all be routed to Sub1 
if so, how?
Thank you

On a Genos, it's Menu>Lineout. It will be the same, or similar, on a Tyros.

Cheers,
Fred

[sugarplumsss]

Does assigning a part in Sub 1, ( or Sub 2 for that matter ) remove that part from the main mix?

[overover]

Does assigning a part in Sub 1, ( or Sub 2 for that matter ) remove that part from the main mix?

Yes.

Note: With the Tyros 2/3/4, the Sub out routing is only effective if a (mono) jack plug is connected to the relevant sub-outs. If NO plug is connected, all parts are output at the Main outs, even if they are actually routed to Sub outs. With Tyros5 and Genos, on the other hand, Sub out routing is ALWAYS effective, even if NOTHING is connected to the relevant Sub outs.

Best regards,
Chris