Connect to Psr s670 mixer, microphone, and external speakers

[Alle]

     Psr 670, behringer 1002 mixer, microphone, Presonus Eris 3.5 monitors, I want to connect everything but nothing works.

     If I connect only the monitors to the keyboard, both the internal speakers and the monitors play;

     If I connect the keyboard, mixer and monitors, internal speakers and monitors always play, and the mixer does not control anything.

      Am I wrong connections or what else?

     grazie
   Alessandro

[travlin-easy]

First and foremost, why do you need a mixer in the first place? In reality, you have all those features on the back of the keyboard.

You can plug the mic directly into the keyboard using the mic in plug and control it with the keyboard, volume, effects, etc...

To turn off the keyboard's onboard speakers, mere plug a 1/4 inch phono plug into the keyboard's headphone jack - The speakers are then defeated, but you still have sound coming from the keyboard's output which can then be routed to any external, powered, sound system.

I eliminated a mixer from my setup nearly 30 years ago - it really served no useful purpose.

Hope this helps,

Gary

[MarkF_48]

As Gary suggested you don't 'need' the mixer, but if you want to use it, the connections below should allow you to control the volume of the keyboard with the mixer to the Presonus monitors. To disable the PSR670 speakers I use just a 3.5mm to 6.35mm headphone adapter that usually is provided with headphones rather than have actual headphones connected. I assume you have the microphone(s) working with the mixer/monitors OK(?)

PSR670 (L/R Output) > --- 6.35mm TS cables --- > Behringer 1002 (Line In 3/4 L/R) .... Behringer 1002 (Main Out L/R) > ---6.35mm TS or TRS cables --- > Presonus 3.5 Monitors (TRS L/R)