News:

PsrStyles.com
- Download Styles and Expansion Packs

Main Menu

psr s970 startup issue

Started by imzain786, September 06, 2018, 03:37:33 AM

Previous topic - Next topic

imzain786

Hi everyone,
from yesterday i am facing a startup issue on my psr s970, when its power ON, stuck on yamaha logo for long time.
after 2 or 3 time try to start, then suddenly starts normal .

regards
zain

mikf

You might want to try a system re set.
Mike

imzain786

i can't reset my board. because of i have not backup of my installed expansions packs :/ :-\ :'(

EileenL

This is correct as when you switch on it takes a few seconds to make sure everything is ready and then the home page will pop up. Mine has always dome this. Genos works the same.
Eileen

DerekA

Sounds like it is not always booting up properly if it takes 3 tries.

I would suspect a hardware fault. You may find that one day it just doesn't start at all, and may need to go to hospital :(
Genos

imzain786

Is there any way to diagnose or troubleshooting the issue by self?
I already test hardware from the setting..by using hardware test mode.
All thing is oky.
But still facing startup issue...it is not start on 1st attempt.
😥🤔

AlBags


If there are any devices plugged .. ESPECIALLY USB, disconnect them and try again.
ALL devices!

Al.
😊  I started out with nothing .. and I've got most of it left!  😊

🎹 Tyros 5-76,  now the brilliant Genos 🎹
Genelec 8030C Studio Monitors on K&M stands
K&M Spider Pro Stand, K&M Accessories. I love K&M!

pjd

First thing, first.

When it does finally boot (even after 2 or 3 attempts), back up everything now!

Until a component fails for good and the unit doesn't pass self-test, This is a difficult problem to diagnose.

Please, back up your data immediately.

Wish you the best -- pj

overover

Quote from: imzain786 on September 06, 2018, 05:21:45 AM
i can't reset my board. because of i have not backup of my installed expansions packs :/ :-\ :'(

Hi Zain,

it is NOT possible to backup the installed Expansion Packs from the PSR. But you should have your Packs (.ppf/.cpf format) on the PC (and preferably on external media) and usually also in YEM.

But you should backup your System settings and the User drive by using the internal BACKUP feature.

A normal System Reset (by holding down the rightmost C key while powering on the PSR) does NOT delete your installed Expansion Packs. But probably such a System Reset will not solve the problem definitively.


Best regards,
Chris
● Everyone kept saying "That won't work!" - Then someone came along who didn't know that, and - just did it.
● Never put the Manual too far away: There's more in it than you think! ;-)

EileenL

When I turn on my 970 it shows the Yamaha Sign. At around 10 seconds the page with my name comes up and then you will hear a click and the home page comes up and you are ready to play. About 20 seconds in all and this is perfectly normal for this keyboard. How long are you waiting before you switch in on and off which is not a good thing to do.
Eileen

imzain786

When I turn on my 970 it shows the Yamaha Sign. and still hang on this screen for long time, i wait 1 minute  or more, but still stuck on this screen in 1st attempt . then i turn off and unplug then power, then try 2nd attempt ( same issue) . after try 4 to 5 times try ,its start normal At around 10 seconds yamaha sign then the page with my name comes up and then hear a click sound and the home page comes up and  ready to play. About 20 seconds in all and this is perfectly normal.

i am facing this issue last two days :/

travlin-easy

Do you have a USB drive plugged in at the time? If so, try removing it and see if the problem persists. And, you can do a System Reset without loosing your settings and data. Merely hold down the rightmost white key while powering up. The only thing you will loose is your fingering mode, which can easily be restored.

Gary 8)
Love Those Yammies...

imzain786

i checked both of ways, with usb plug and without usb plug.. still same situation :/

i will try to do system reset today. but i don't want to lost my any data which is installed on my board. because i haven't my .ppi/.ppf file of my expansions. and also i can't copy any thing on my expansions files and styles on usb :/


EileenL

The one thing you should always do is keep a copy of your expansion packs as a back up so that if it goes wrong and has to be replaced you can always reload them.
Eileen

imzain786

yes brother you are right, but suddenly , unexpected lost my laptop data, my all hard-work was lost due to HDD dead :-\ . that's why i haven't  my customized expansions backup file, which is installed  :'( and this expansion is most important for me at any cost. because it taken time 4 to 5 months to create my this pack.

imzain786

i try to only system reset from the system utility option but nothing happened and found nothing any changes in keyboard. like owner names etc. no any changes.

overover

Quote from: imzain786 on September 10, 2018, 04:06:35 AM
i try to only system reset from the system utility option but nothing happened and found nothing any changes in keyboard. like owner names etc. no any changes.

Hi Zain,

some parameters can NOT be reset with a System Reset or Factory Reset: Please refer to "Parameter Chart" in S970 Data List book, pages 75 - 84 (rightmost column "Note").


Best regards,
Chris
● Everyone kept saying "That won't work!" - Then someone came along who didn't know that, and - just did it.
● Never put the Manual too far away: There's more in it than you think! ;-)

imzain786

Dear friends,
i hope all are fine. i am facing this hanging issue since last night,  after a long time. i can't troubleshoot this issue. why stuck on startup yamaha logo  :-[ :(

regards
zain 

poorguyac

my friend 970 had the same issue. Is there any suggestion what to look for or what's caused the issue? Thank you everyone