Multi- Sampling in Yem

[robinez]

Hi Robinez
I downloaded Samplerobot trial and folowed all instructions which took me a couple of hours to get right
I managed to get a SF2 file .
I could only get limited values like mono and so much this or that
The recording is very good for mono and is just a little distorted
Is that because of the trial restrictions?
Other wise a small success
I got the vst 2 dlls and if i do this in stereo ,will i get a better more less distorted sound.
I would say grainy rather than distorted really.

...

i have no experience with the trial, but i doubt that it will only sample in mono. The grainy sound is probably a side effect of using the trial which probably will sample with a lower bitrate (guessing).

In the full version that i use the sound is exactly the same as using the vst itself. There is no grainy or distorted sound and in my case everything is stereo when sampled. It's a perfect copy of the original.

considering your remark about getting experienced in XX years. There is a huge difference sampling digital sounds versus analog sounds (like real guitars, flutes, etc). If you only want to sample synths or vst's i think that with some help and tips and tricks the learning curve is about two weeks (with lots of test projects) to master the ins and outs of samplerobot (which does the complex tasks for you). When sampling analog sounds like a real guitar then it's a totally different game, it will take a lot of experience to get good results with that. But 'cloning' vst sounds or synth presets is very easy to do and learn with modern programs like samplerobot.

[JohnS (Ugawoga)]

Hi Robinez
I purchased the full version yesterday and spent last night with one success and three failures

One being that i thought i set all to instructions only to find i could not save as a box appeared saying  NOTE LENGTH EQUAL TO 0 for just two notes in the auto sample that i did. I wondered when i put 2 in the release check box it lengthened the sample  more that 8 secs which i asked for.
It went ok when i left that at 0.
The other strange anomally was that my first two goes the sample was a semi-tone out to my Genos and that maybe because i did not have vst checked.(i bungled).
Sokaris as offered to help me a little and will send some samples when i get a good run.
Thanks for coming back Robinez.

All the best
John
  ps, the weather here in UK is hotter than hell today!!

[robinez]

Hi Robinez
I purchased the full version yesterday and spent last night with one success and three failures

One being that i thought i set all to instructions only to find i could not save as a box appeared saying  NOTE LENGTH EQUAL TO 0 for just two notes in the auto sample that i did. I wondered when i put 2 in the release check box it lengthened the sample  more that 8 secs which i asked for.
It went ok when i left that at 0.
The other strange anomally was that my first two goes the sample was a semi-tone out to my Genos and that maybe because i did not have vst checked.(i bungled).
...

when running the project wizard you have to set the note length to the sample length you want to create, the release value should be 0, because you are going to modify the release in the samples in the yem explorer later.

The semitone is probably because you sampled your project in 48 khz, don't do that, do your sample work in 44.1 khz, stereo, 16 bit.

If you want i could give you a workshop online to show you how to do it and get it in the genos. I can also show you some examples of how my genos sounds right now with all my own expansions, so you can get a picture of what's possible once you know how to do it, i'm sure that you would be amazed of whats possible once you know the special tricks in the genos combined with your own samples. I'm in a dutch facebook group where every tuesday we give these kind of online workshops ranging from easy to advanced techniques for the members. So my studio is completely suited with multiple cams and every synth and workstation is digitally connected to the online video platform.

If you want that just sent me a private message and i will give you some time options and the link of the online webinar room we can use. I think it would help you tremendously and will save you a lot of time discovering the process yourself. Of course this will be free of charge (no hidden agenda, just want to help you with this.)

[JohnS (Ugawoga)]

Hi Robinez
Thanks for the offer .
I have sent message
I am always open to any help


All the best
John

[alka]

You are right dear Pino..

Dear John..
Searching on Google i found it https://www.soundlib.com/samplit/
It's easy with cost $139 and we can to create our sampling as SF2.
Watch the tutorial video.
Best Regards

I bought Samplit 2 from jrrshop.com(plugivery.com), they sent me serial(activation) key and link to soundlib.com, for download full samplit 2 installation file. But samplit.com not receive me password to login. support@samplit.com not responsible for anything  

[JohnS (Ugawoga)]

Hi
I am always a believer in you get what you pay for and Sample Robot fits the bill.
I have not used sample Robot for a couple of weeks now as i am finishing off some songs. In mix mode and nearly done
I will get back in touch with Robinez and Sokratis when i have completed my task.
What i have done and the help that i had, Sample Robot is tops for me. Thanks to Sokratis and Robinez.
When purchasing music software , go to a reputable outlet like Thomann or straight to the makers of the software on their site and buy the download..
If you paid through pay Pal , you can put a dispute in , the same with Ebay.

Hope you get sorted Alka


All the best
John 

[Pino]

John, it's great that you have found an app that works for you, but, "Audio Layer" for the iPad is also an excellent app for sampling new voices for our keyboards and it's just $15

"AudioLayer is a full featured open standard audio multi-sampler pushing the boundaries beyond what has been available even on the desktop music production world."

Pino