Genos and MFC-10

[chikitin]

9 Set in the PSR-S970 the receiving midi-channel A16 to Keyboard  <-- On Genos, the default midi channel for this is already A16.

Hi there,

I am very glad to see this post. How can I set "Set in the PSR-S970 the receiving midi-channel A16 to Keyboard"? I have PSR-A3000 and I am pretty sure it is similar to S970?

Thank you very much,

CS

[chikitin]

I did it. Just for people who are new to the keyboard. Press Function> MIDI go to RECEIVE tab and go down to PORT 1 Ch16, then change the PART from SONG to KEYBORAD

[chikitin]

Hi Vali,



3 Set the Status to bF (+ FC Edit button)
4 Set DataContrl to 007 (+ FC Edit button)

Hi There,

I see for control changes we need to set the Status to b*. In your case bF to send from Ch16. However, I don't see where you got the 007 from?

Any help would be greatly appreciated.

CS

[sjn2048]

Hi I recently bought an MFC-10 and posted about it on th general forum.
I know this is a bit of duplicate posting but as its relevant I thought I'd add it here:

The MFC-10 is fine for what I need for now, however I'm an ardent hardware/software developer and can see the time when I might want to replace the existing PCB with a dedicated micro controller (Arduino or Adafruit Metro M4 running circuit python) to allow programming, setup and configuration over WiFi  or over USB using iPhone/iPad or PC. Obviously utilising the existing case, switches, display and possibly the 12V power supply.

Now if only I could find a non working example MFC-10 to try it on!

I'm currently have one of these on the bench to try out as a MIDI Controller -

https://blog.adafruit.com/2018/12/12/new-guide-neotrellis-m4-midi-file-synthesizer-adafruitlearningsystem-neotrellis-midi-synthesizer-adafruit-adafruit/

[micdonk]

Hi sjn2048,

Right now I using a feather m0 ble to create a wireless connection with my iPad.
I use a midi in and Through to connect the wireless connection module between the Genos and the MFC10. This give me the freedom to do what ever i want to do with it, without the modification of the MFC10.

[frankmusik]

NEW Manual GENOS on MFC10 (Language German)

https://www.keyboard-akademie.de/wp-content/uploads/GENOS-und_MFC10_V2.pdf

greetings frank

[Rick D.]

Frank,
Is this manual available in English?

Thanks,
Rick D.

[dawn68]

Anyone lost  midi settings on mfc10 since 2.01 upgrade?

[Rick D.]

Dawn,

I just programmed my MFC-10 yesterday with version 2.1, and it is working fine. I don't know if having it programmed in version 2.0, then upgrading to 2.1 will affect it though.

Rick D.

[valimaties]

Hi.

I've used MFC10's manual to setup this board with Genos connection. Before upgrading from 2.0 to 2.01 I've did not made the backup of keyboard (midi, system, aso) and nothing happens with connection between MFC10 and Genos after updating to 2.01.

Regards,
Vali

[Genos1957]

Greetings to everyone, I understand that so many years have passed since the opening of this post. However, I still want to try to ask the author for valuable information. I followed his scheme to program the volume on mfc10 and it worked very well, but I didn't understand why I don't check the volume of right two and right three. Is it possible to do this?