Change existing Balance settings as a new default.

Started by Reg, October 28, 2024, 04:17:37 AM

Previous topic - Next topic

Reg

I want to adjust the existing Balance settings and save the new settings as a default so that I don't have to change them every time I play a new song. The volumes on the Left and R/h 1&2 are too low and the Style is too loud. I want to lower the Style to 80 and raise the left and r/h 1&2  to 125. I know how to adjust the sliders but don't know how to save them as a default!

Rick D.

Reg,

I do that with Registrations. I do a separate registration for all songs. Some people have a Registration as a start up Registration. It is all personal preference. In either case they both will do what you want to do.

Rick D.

Reg

Hi,Rick_thanks_for_the_reply.Sounds_like_I_need_a_start_up_Registration.How_do_I_do_this?

ChrisH

Hi Reg

Just bear in mind that different styles can easily have different balance settings I most find that if I'm try out a new set of styles (I do assume you are talking about styles and the melody side and not songs (like MP3 or Midi songs that already have the melody) I usually assign a slider to st7yle volume so I can pull down the style volume and that then usually balances the left, R1,2 and 3 out nicely. A start up registration  will only be OK for the first style you play and at worst every other subsequent style might be too soft or too loud, Also bear in mind that if you are only using say R1 for your voice and it's say a flute it will appear softer than the backing!

Chris
Currently : Tyros 4 Keyboard    Previous Keyboards : SX900, S650, E-373 and S550

Rick D.

Quote from: Reg on October 28, 2024, 11:42:23 PMHi,Rick_thanks_for_the_reply.Sounds_like_I_need_a_start_up_Registration.How_do_I_do_this?
Just like you would do any other Registration.
Set the keyboard as you would like and save it is Startup.

Rick D.