Genos 2 style problem

[newkey20]

Today I had a problem with the 80sAustrianPop style from the Yamaha Entertainer 2016 pack.
I changed the drums using Drum Setup to EDM Kit from Genos 2, changed the bass volume, saved the style to a pendrive and one time when loading the style the following message appeared:
data has not been loaded properly
and I couldn't load the style.
The same problem occurred twice when modifying this style. Once it disappeared completely from my pendrive.
Why is this happening?

[overover]

Hi newkey20,

There may be a problem with the USB stick you are using. Please save the changed style first in the internal User drive. If this works and the changed style can be loaded again properly from there (after you had first loaded any other style), copy the style from the User drive to the USB stick and test again. The stick may be defective and you need to use a different/new one.


Best regards,
Chris

[newkey20]

I have all the styles, registrations and playlists on this pendrive and so far I haven't had any problems...
The remaining styles saved on the pendrive are loaded every time - both the factory ones and others

[overover]

I have all the styles, registrations and playlists on this pendrive and so far I haven't had any problems...
The remaining styles saved on the pendrive are loaded every time - both the factory ones and others

Hi newkey20,

Please try, as I mentioned above, to first save the changed style in the USER drive and then report back here whether this worked. There is always a "first time" when an error occurs with a data storage medium such as a USB stick. And every data storage medium is a wearing part, i.e. has a limited lifespan.

Please make sure that you have several backup copies of the USB stick you are currently using (e.g. on your computer, other USB sticks or external hard drives).


P.S.
When saving the changed style, please use a new/unique name, especially to ensure that you actually load really the style you just changed later.


Best regards,
Chris

[EileenL]

When you made these changes to the style did you then go to Style creator and press save. This is what locks in your changes.

[newkey20]

I saved the style after changes in the style creator. And the style was loaded several times without any problems. But one time, when loading the style, an error appeared: data has not been loaded properly.
Next time I get an error like this, I'll move the file to User drive and see if it works.
Penrive is new and I've only been using it for a month, but we'll see if there's a problem with it.
But I haven't had this problem with any other style.

[EileenL]

You usually get this message when trying to load in a style or registration that is not from your present keyboard. Did you format the USB you are using on your keyboard first.

[KurtAgain]

If the error occurs again, I would not trust the pendrive for another minute and would immediately switch to another pendrive from a different manufacturer. Pendrives are cheap, but the hassle of data loss is great.

[newkey20]

Yes, I formatted the pendrive in Genos, I also made a copy of it and I will keep an eye on it.
But it's strange that I only had a problem with this one style...

[jckeeys]

I am experiencing the same problem with "Slow Bossa" style? I try to save it to my user style folder and when I try to recall it says the same thing Data issue??? I didn't change anything?? I've done this many many times with my Genos1 and never had a problem?? Also, have done this with other internal styles on the Genos2 and never had a problem .... Only "Slow Bossa'?

[jckeeys]

Saved "Slow Bossa' utilizing "Style Creator" issue resolved?