Dust cover for Yamaha Genos 2 with mounted GNS-M01 speakers?

[ganaregadhav]

Are there any dust covers available to cover the speakers and the Yamaha Genos 2 keyboard, with a slit at the center to accommodate the sheet stand?

[Gunnar Jonny]

Maybe something like this?

https://www.pianoaccessoryshop.co.uk/product/genos-keyboard-cover-set/

Btw, I bought such set for G1 when it was new, and it fits perfectly for my G2 as well.

[ganaregadhav]

This is fantastic. Thank you. Now I just need to find this one in USA.

[DerekA]

I have one like this for genos 1. It does the job but the trouble is it isn't firmly anchored at the back, it just slots in under the music rest. This means at the slightest touch, it just slides off.

I attached a clothes peg to the back corners to add a little weight which helps, but I'm always worried I will scrape the panel by accident one day.

So it's better than nothing, but you may find it frustrating.

[muzicman147]

A little tip to keep the cover on you Genos.
When I bought my keyboard like most people I also bought a set of covers.
I only have the use of one arm so putting the slippery nylon cover over the main board and keeping it there while tucking the bits around the speakers ect, became a problem, so I started looking for a solution.....
I looked at other designs, but they all looked much the same and besides I already bought a set of covers, so I looked at cover to see if I could change mine some how and this is what I came up with....
There is a piece of material between the speaker and the music rest that tucks over the keyboard, I worked out that some kind of weight would help me hold the it when fitting the cover.
So I started looking for something, I looked at curtain weights or coins but decided they could mark or damage the keyboard and then found the perfect item......
A bog standard child's pencil rubber !!
I went on Amazon and found a pack of 10 erasers for £6, that were big enough to have the weight but shouldn't damage anything.
Once they arrived the wife put a rubber on each side and stitched it shut, the rubbers are exactly the right size and weight and fit perfectly making it so much easier to put the cover on, and it also stops the cover being blown or accidentally knocked off.

[DerekA]

That sounds like a good idea, I'm always worried that my "weight" will cause damage, but this sounds like an ideal solution!