Some observations

[vlbrgt]

Yesterday I received my Genos2.
Everything connected and sitting around playing with different styles.
Also tested some settings.

Some observations and questions to confirm the results:

1.
Selecting something on the touch screen with the sound of the touch screen On was creating an extra enoying sound.
Reinstalled firmware several times, but the problem kept coming back...
If I set the screen beep to Off (menu2-Utilities - Touchscreen - Sound Off), the extra sound also disappeared.
After much brainstorming and searching, I finally found that it was my externally connected monitor that produced this extra sound via the HDMI port.
Turned off the monitor speakers and the problem was resolved. Yippee.
If other users also experience this problem, this is the solution.

2.
When installing the new firmware, a number of steps are showing.
After step 5, the screen shows 'Not found [skipping]' for a few seconds, and then the message that the update was successful and I can turn off the keyboard.
Is this correct ?

3.
Starting up with 'Break, ending2 and ending3' pressed makes it possible to take a screenshot with button OTS4.
Genos1 was making a fizzle sound in the background when OTS4 was pushed.
With my Genos 2 this is a completely different sound. A louder one-time sound.
Is this correct ?

4.
I set the button lighting on my Genos 2 to the lowest setting.
However, I notice that the button that is in standby to start playing is flashing at the highest brightness.
Is this correct ?

5.
When I format a USB on the Genos 2, it is 'disconnected' after formatting is complete.
I don't remember this being the case with the Genos 1.
Is this correct ?

Regards
Etienne

[ckobu]

Congratulations on your new keyboard.
Here is my experience:
1. Thank you for the information, I might need it
2. that's right, the same thing happened to me, this is that moment
https://youtu.be/Bn2Ys-iZ6_Y?si=w-tWprvMEfQCG1HV&t=275
3. the sound is different and not always the same as with Genos, it is important that it records the screen
4. it's the same with me, it also applies to Fill in, I hope they change it with the upgrade because it bothers me a bit
5. I have not tried to format the USB, I will let you know when I try

regards, ckobu

[vlbrgt]

Thank you for the reply.

Regards