Phantom power.

[mhack]

I have ARTI Phantom Power. Can I use XLR OUT to TS unbalanced to Mic In? SX900.
Thanks.
Mike

[overover]

I have ARTI Phantom Power. Can I use XLR OUT to TS unbalanced to Mic In? SX900.
Thanks.
Mike

Hi Mike,

You probably have the "ART Phantom I" (48V Phantom Power Supply):
>>> https://artproaudio.com/product/phantom-i-48v-phantom-power-supply/

Yes, to connect the ART's Mic Output (XLR) to the SX900's Mic/Guitar Input (TS) you use an (as short as possible!) unbalanced "XLR female to 6.3mm TS" cable, which is wired as follows. Also see the attached picture.

XLR pin 1 (ground/shield) & XLR pin 3 (signal -) bridged   <>   TS Sleeve
XLR pin 2 (signal +)   <>   TS Tip

By the way, the SX900's MIC/GUITAR switch should be set to MIC.


Best regards,
Chris

[attachment unavailable]

[mhack]

Thanks, Chris! That is exactly what I purchased. Just wanted to be sure because
my youngest granddaughter, Haley, will be with me in a couple of weeks, to record
my song BAD BOY! We will use an Audio Technica 2035.
Best regards,
Mike