News:

PSR Tutorial Forum is Now Back to Life!

Main Menu

Tyros 3 sound from headphones but not when they are out

Started by Bell140, May 20, 2022, 06:32:41 PM

Previous topic - Next topic

Bell140

I am getting no sound if the headphones are unplugged but can hear it through the headphones. Any suggestions? Have tried a reset and that didn't do it.

Graham UK

Headphones are normally supplied with two adapters 3.5 & 1/4".
Check one of the adapters is not left in the keyboard.
DGX670

Bell140


EileenL

Make sure you don't have your speakers switched of.
Eileen

overover

Quote from: Bell140 on May 20, 2022, 06:32:41 PM
I am getting no sound if the headphones are unplugged but can hear it through the headphones. Any suggestions? Have tried a reset and that didn't do it.

Hi Bell140,

Please check the following setting:

In "Function > Utility > Config 2" the "Speaker" parameter must be set either to "Headphone SW" (speaker sound is cut off when headphones are plugged in) or to "ON" (speakers are always on). be. With "OFF" the Tyros3 speakers are always off.

If the "Speaker" parameter is not set to "OFF" here, check that the TRS-MS03 speaker system is connected properly.

Hope this helps!


Best regards,
Chris
● Everyone kept saying "That won't work!" - Then someone came along who didn't know that, and - just did it.
● Never put the Manual too far away: There's more in it than you think! ;-)

Bell140


Kevin Sanders

I had exactly this a few days ago after disconnecting everything and mounting on a new stand.
Stupid mistake, I hadn't connected the sub-woofer.
Worth checking.
Cheers
Tyros 5, P-60, DD-65, MX-49 BK, WX-7, EZ-AG
Zoom MultiStomp MS-70CDR (for MX)
PSS-A50, PSS-F30