Best EQ &CMP settings for tyros 4 through stagepas 400

Started by tyrosguy85, May 15, 2021, 02:32:22 PM

Previous topic - Next topic

tyrosguy85

Hi all
Thinking about getting a stagepas 400.
What would be the best eq and cmp settings please?
Or do i keep my current setting as this:
Eq-flat
Cmp (on) basic.
Cheers
John.

Toril S

I do that when using my Bose L1 Compact. I have a 3 keyboards, all set on flat when using PA :)
But I am no expert :)
Toril S

Genos, Tyros 5, PSR S975, PSR 2100
and PSR-47.
Former keyboards: PSR-S970.

https://www.youtube.com/channel/UCLVwWdb36Yd3LMBjAnm6pTQ?view_as=subscriber



Toril's PSR Performer Page

travlin-easy

The setting will vary significantly depending upon the venue. Flat never was an option for me - it just didn't cut it, even when using the Bose L1 and Bose Compacts.

You need to set up in a relatively large venue, and give this a try:

EQ1 5
EQ2 4
EQ3 3
EQ4 4
EQ5 8

This is just the basic settings I used successfully for many years, but there were times when I had to make some minor adjustments, depending on the venue configuration, indoors, outdoors, ceiling height, etc... When you find what you like to hear, then save the information to a registration so it can easily be recalled,

Good luck,

Gary 8)
Love Those Yammies...

Toril S

Toril S

Genos, Tyros 5, PSR S975, PSR 2100
and PSR-47.
Former keyboards: PSR-S970.

https://www.youtube.com/channel/UCLVwWdb36Yd3LMBjAnm6pTQ?view_as=subscriber



Toril's PSR Performer Page

tyrosguy85

Hi Gary.
I take it that i leave the EQ to flat and the CMP to basic when i adjust to your settings?
Got my stagepas 400 today,Really like it.I set the low and high setting on the mixer to twelve o'clock.
Cheers
John.

travlin-easy

Love Those Yammies...